Bedienungsanleitung Pulsar Digisight LRF N870 (Seite 7 von 50) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

572627

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

on actual position).

 Automatic exiting the menu takes place after more than 10 seconds of

inactivity (no navigation).

Status bar

Status bar in the bottom part of the display shows information as follows:

 Number of weapon choice (1,2,3):

 Digital zoom (from 1.1x to 2.0x with 0.1x increment): x2.0

 Automatic shutoff is on:

 IR Illuminator is on (with power level 1;2;3):

 “SumLight™” function on/off:

 “Automatic contrast” function on/off:

 Running time:

 Battery charge level or connected external battery:

The riﬂescope has three menus:

M1 – menu 1 (main menu);

М2 – menu 2 (additional menu);

M3 – menu 3 (rangeﬁnder menu).

Active menu is highlighted with a frame . To switch to another menu, rotate the

controller and move the cursor (the frame will be ﬂashing), press controller

button (7).

Menu М1 (main menu) includes:

 “Sum Light™” ON/OFF

 “Automatic contrast” ON/OFF

 Weapon selection (1;2;3)

 Selection of preloaded reticle

 Reticle colour selection

 Weapon tilt indicator ON/OFF

 Brightness control of onscreen symbols

(menu and status bar)

Menu М2 (additional menu) includes:

 One shot zeroing

 “Freeze” zeroing

 Selection/disable of video output signal

 Clock setup

 Remote control activation

 Automatic shutoff ON/OFF

 Assignment of the functional button (8) -

“SumLight™”, “Automatic contrast”, “Reticle

colour selection”

Menu М3 (rangeﬁnder menu) includes:

 “THD” function (selection of true

horizontal distance) THD

 Choice of rangeﬁnding indicator

 “AoE” function (angle of elevation

measurement) AoE

 Switching between units of measurement

(metres/yards)

 Return to default settings

Aut

M/Y

DESCRIPTION OF MENU OPTIONS

Menu М1 options

“SumLight™” function

SumLight™ function substantially increases sensitivity of the CCD array thus

enabling observation in low light without using the IR Illuminator. When using the

unit at a sufﬁcient level of night illumination, the Sum Light™ function can be

deactivated manually using the menu or the functional button (8).

 Rotate the controller (7) to select “O ress of the controller n” or “Off”. Short p

button conﬁrms choice.

 Icon “SumLight™” (on or off) is shown the status bar. on

Attention! Please note that higher sensitivity causes an increased noise level in

the picture, lower frame rate; image slows down, if the riﬂescope is rapidly

moved from one side to the other, the picture may be blurred for a moment.

Neither of these effects is a ﬂaw of the unit. After the SumLight™ Signal

Processing Program is activated, light dots (pixels) may appear in the ﬁeld of

view which is explained by operation peculiarities of this function. This is not a

defect either.

“Automatic contrast” function

 Rotate the controller (7) to select “On” or “Off”.

 Short press of the controller button conﬁrms choice.

 Icon “SumLight™” (on or off) is shown the status bar.on

Weapon selection (1,2,3)

This menu option allows selection of three variants of zeroing parameters for

various types of weapons or for various distances. Also this option allows you to

save three types of reticle for each weapon.

 To select option, press controller button and select number out of the list

(1; 2; 3).

 Conﬁrm your choice by a short press of the controller button.

 Number of the selected variant of the weapon to use is shown in the status bar

in the lower portion of the display.

Note: Originally the reticle for all the three variants is located in the display

centre (coordinates X=0;Y=0). Further on, each type of weapon (distance)

requires individual zeroing.

Selection of preloaded reticle

This menu option allows selection of one of the 13 preloaded reticles. Menu

option shows number of the reticle.

 To select option, press controller button and select reticle number out of the

list. Corresponding reticle will be shown on the display.

 Conﬁrm your choice by a short press of the controller button.

 List and full description of the reticles can be found at www.pulsar-nv.com

IMPORTANT! Please note that due to peculiarities of OLED display technology,

when switching between various reticles, you may notice on the riﬂescope's

display residual “ghost image” of the previous reticle. The “ghost image” looks like

semitransparent white lines. The image may appear if a new reticle does not

contain elements (such as lines, circles, bars etc.) of the previous reticle. After a

while the “ghost image” becomes less noticeable. We do not take any

responsibility for the claims in connection with “ghost image” arisen due to multiple

change of reticles.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pulsar Digisight LRF N870 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info