Bedienungsanleitung Pulsar Recon 750 (Seite 6 von 32) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

572616

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Play mode

Press the “ON” (2) button to start

the device.

Press and hold the “on/off”

button (12) for 4-5 sec to start the

video recorder. The blue LED

indicator (14) on the right of the

“on/off” button (12) will light up.

Turn the switch (13) to the “play”

position.

The screen displays a list of recorded video clips (in .avi format) and

captured images (in .jpg format). Use the (16) and (17) buttons to

select the required video clip or image. Press the “OK” (10) button to

play a file. Press the “OK” (10) button again to pause a file. Use the

(16) REW and (17) FWD buttons to rewind a file. To speed up/slow

down rewinding press the respective button.

Press the “mode” button (15) to exit Play mode.

MOTION DETECTION

Start the device and the video recorder, select option “Motion

detection”.

Press the “OK” (10) button, select option “Yes”.

Turn the switch (13) to the “rec” position.

The record icon “AUTO” is displayed in the top left-hand corner of the

screen.

Press the “OK” (10) button to switch the video recorder to stand-by

mode. As soon as a moving object appears in the field of view,

recording starts automatically (“rec” icon displays in the top left-hand

corner of the screen).

Note: as illuminance level decreases, the distance at which a moving

object can be detected, goes down.

After the object is out of the device's field of view recording continues

for 10 seconds and then stops automatically (“rec” icon goes out).

Recorder returns to stand-by mode again.

Turn the switch (13) to the “play” position and press “mode” (15) to

proceed to the menu.

Note: it is advised that you install the n a tripod when Recon 750R o

using Motion detection.

Max. recording time depending on the card capacity and video clip

resolution:

Capacity of memory card

640x480 (VGA) 320x240 (QVGA)

512Mb

1Gb

2Gb

4Gb

28 min

55 min

111 min

222 min

102 min

200 min

400 min

800 min

After recording you can remove the memory card and view or process

recorded data using some peripheral equipment (PC, lap-top etc.). Press

the memory card to release it from the slot. Pull out the memory card.

SD MEMORY CARD

Video clips and images captured are saved to the SD memory card

only. The device does not have internal memory. Maximum capacity

of a memory card should not exceed 4Gb.

Please format the memory card in

the device before use. Follow

instructions set forth in option

“Format” of menu “Set up”.

Open the cover of the memory

card slot. Insert the card in the slot

as shown in the picture and push it

in. You can hear a click when the

card locks into place.

Close the cover of the memory

card slot. Ensure that the cover is

properly closed.

Do not remove the memory

card during an operation when

the card is being accessed.

Doing so may damage the memory card and the device, and corrupt

data stored on the card.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pulsar Recon 750 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info