ADJUSTING THE STOPWATCH HAND POSITION
l
Before setting the time, be sure to check that the STOPWATCH
hands
are in the “0” position when the
STOPWATCH is reset
(for resetting
the STOPWATCH, see "STOPWATCH".)
A
B
Press A or B to reset the STOP-
WATCH second and minute
hands to the “0” position.
s
STOPWATCH
minute hand
Push back in to normal
position.
CROWN
STOPWATCH
second hand
A
B
CROWN
Pull out to second click
s
OR
A: The hands move counterclockwise.
B: The hands move clockwise.
* If either of the STOPWATCH hands is not at the "0" position, reset
them , following the procedure below:
CROWN
TIME SETTING
Date (VD53 only)
Hour hand
Minute hand
Second
hand
l
Before setting the time, check that the stopwatch measurement is
stopped.
1 Pull out to first click, and turn clockwise until the previous day’s date
appears. (VD53 only)
2
Pull out to second click when the second hand is at the 12 o’clock position.
The second hand will stop on the spot. And advance the hour and
minute hands by turning the crown.
3 Turn clockwise until the desired date appears. (VD53 only)
4 Turn to set the hour and minute hands.
5 Push back in to normal position in accordance with a time signal.
