Bedienungsanleitung Pure Acoustics Super Nova 8 (Seite 2 von 2) (Englisch)

584539

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

INTRODUCTION

Thank you for purchasing Pure Acoustics’products, and welcome to the Pure Acoustics family

of satisfied customers! Pure Acoustics was established to fulfill the need for high quality

speakers of exceptional design at an affordable price. After years of research and develop-

ment, and by manufacturing all parts ourselves – from the voice-coil to the uniquely-designed

crossover – Pure Acoustics is able to offer you speakers of superior value.

Each speaker component has been designed and engineered with first-rate materials to pro-

duce exceptional sound. Our speakers offer the best of it all – high-quality sound, hand-made

solid construction, and a remarkably stylish appearance. We welcome you to witness the

results. Our team’s dedication to quality, reliability and attractive design has created some of

the best-value speakers you can find today.

Unpacking

Carefully remove your new Pure Acoustics speakers from the box. Inspect the speakers for

transit damage. If you discover damage, please contact your dealer immediately. Save your

carton, it’s the best possible protection for your speakers should you ever need to move them.

Connecting Wires and Receiver

Reading this and your amplifier’s owner manual fully will help you to set up your speaker

properly and reward you with a fine listening experience.

WARNING for U.S.Customers – In some cases, Pure

Acoustics models may contain two pairs of binding post

wire terminals. Per Diagram A, it is important that U.S.

customers do not remove the jumper links which are

attached between the positive and negative terminals.

Removing these connectors, and/or wiring more than

one left and one right wire into your speaker will lower impedance and can damage your

equipment. If your speaker contains these terminals, only connect wires to top positive and

negative terminals, not to the bottom terminals.For further information, please contact 718-

788-4411 for technical support.

Make sure all equipment is turned off. When connecting the speakers, be certain to retain

the correct polarity. Most speaker wire is polarity coded either by color or texture.This means

that each conductor is labeled either (+) positive or (–) negative. In the back of your amplifier,

each channel is labeled (+) and (–) as well. You must ensure that you connect (+) to (+) and

(–) to (–).

Warning: If you connect the speaker wires out of phase,meaning (+) to (–) or (–) to

(+), this will dramatically

reduce bass response and

change the tonal charac-

teristics of the speaker.

Also, if wires

are loose, it

can cause

crackling,

static types

of sounds, and/or

short circuit

your equipment.

Diagram A

Connect wires to top terminals only

Speaker Positioning

The diagram below shows 5.1, 6.1, and 7.1 speaker system placement.

The front center-channel

speaker should be placed as

close to the TV as possible,

preferably directly above or

below the set. The front chan-

nel speakers should be placed

at least 6 feet apart (TV/moni-

tor center) to create proper

stereo imaging. The 5.1 sur-

round speakers should be

equally spaced to the side of

the listener. The rear-center

speaker should be positioned

directly behind the listening

area.The rear channel speakers

should be positioned behind

and slightly to the sides of the

viewer/listener. It may take

some experimentation with

different locations for the sur-

round speakers to suit your

preference and your room.

Running Time

and Cleaning

The performance of the speakers may change during the initial use due to storage and

mechanical limitations. Please allow 15 hours of use for the temperature effect and mechan-

ical parts to attain their intended design characteristics.

Make sure to turn all equipment off before cleaning. The cabinet only requires occasional

dusting. Please avoid touching the drive units.

Troubleshooting, Service, and Limited Warranty

Pure Acoustics products have been designed and manufactured to the highest quality stan-

dards. If you experience a problem, first try to determine if it is indeed a speaker issue.

Determine whether the problem exists in both speakers. If it does, the problem likely origi-

nates in some other component in the system. If the problem is in one speaker only, reverse

your speaker leads (left to right, right to left). If the problem moves to the other channel,your

oblem is not in the speakers.

f y

ou ha

ve determined you have a speaker problem, please contact your dealer or Pure

Acoustics Customer Service at 718-788-4411. Warranty is only valid for the original owner

and is limited to the repair of the product for manufacturer defects, either in materials or

workmanship. Warranty does not apply to units that were subject to misuse, neglect, abuse,

alteration, or improper installation. Warranty does not cover damage due to fire, water, heat,

lightning, or any other cause beyond the control of Pure Acoustics. All warranty repairs must

e acc

ompanied b

y the or

iginal bill of sale

No other document is acceptable or required.

Front left & right

Center

Left surround

(5.1)

Rear left

(Add for 7.1)

Optional

subwoofer

right or

left side

Right surround

(5.1)

Rear Center

(Add for 6.1)

Rear right

(Add for 7.1)

Pure Acoustics Super Nova 8 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info