Bedienungsanleitung Pure Evoke C-D4 (Seite 21 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Norwegisch)

733333

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Updating Evoke’s firmware

Firmware updates for your Evoke may be made available in the future. If you register your product and

include a valid e-mail address you will receive notiﬁcation of ﬁrmware updates and information on how to

update the ﬁrmware for your Evoke (register at account.pure.com). Alternatively, visit

http://support.pure.com at any time to check for available ﬁrmware updates.

Changing the display brightness level

You can adjust the brightness of the display for when Evoke is switched on and in standby. To change the

brightness level:

1. Press the Menu button.

2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose ‘

Brightness

’.

3. Turn and press the Select dial

or use the <Select> buttons on the remote control

to choose either

‘Normal Mode’ to change the settings that apply when Evoke is switched on, or ‘Standby Mode’ to

change settings that apply in standby.

4. Turn the Select dial

or use the < > buttons on the remote control

to vary the brightness level between

1 (dim) and 5 (bright) and push the Select dial or press the Select button on the remote control to

conﬁrm your preferred setting.

Setting the time and date

The time and date on Evoke are automatically set by the digital radio signal. If the time or date does not

update automatically, you can manually set it using this option.

Note: Any time or date updates received by a digital broadcast will override manual settings.

Time and date synchronization options

You can synchronize the time and date on Evoke using either the FM or digital radio signal or you can

choose to synchronize the time using both signals.

To specify the clock synchronization options:

1. Press the Menu button.

2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose ‘Date/

Time Set’.

3. Turn and press the Select dial to choose between the ‘DAB’, ‘FM’ and ‘Both’ clock synchronization

options.

Setting the time and date manually

1. Press the Menu button.

2. Turn and press the Select dial

or use the <Select> buttons on the remote control

to choose ‘Date/

Time Set’.

3. Turn and press the Select dial

or use the <Select> buttons on the remote control

to choose ‘Manual’.

4. Turn and press the Select dial

or use the <Select> buttons on the remote control

to set the hour.

Repeat to adjust the minutes.

Note: If you have set your Evoke to use the 12 hour time format, make sure that you select the ‘AM’ or

‘PM’ version of the hour before pressing the Select dial or Select button on the remote control.

5. Turn and press the Select dial or

use the <Select> buttons on the remote control

to set the day of the

month. Repeat to set the month and year.

Changing the time format

1. Press the Menu button.

2. Turn and press the Select dial or

use the <Select> buttons on the remote control

to choose

‘Time Mode’.

3. Turn and press the Select dial or

use the <Select> buttons on the remote control

to choose between

‘12 Hours’ and ‘24 Hours’.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pure Evoke C-D4 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info