7
Fit cables and connections
1. Fit USB extension and aux in cables
Route the USB extension (used for MP3/iPod connection) and aux-in
cable form e.g. the glove box, to where you will fit the main unit, as
required. Note that even if this cable is not required for use with music
devices, it is recommended that it is installed to enable easy access to the
USB socket for software updates.
2. Fit connections to the head unit
Slide out the head unit and connect aux-in cable from Highway or connect
the FM pass-through cable and reroute the existing FM antenna cable and
the pass through cable to where you will fit the main unit. Antenna adapters
(Fakra/ISO/DIN) or extensions may be required.
Note: If the Line out connection on Highway is used the FM transmit/pass
through is disabled.
3. Connect the power loom
Connect the supplied loom to the vehicle’s system ensuring the Highway
300Di power connector is positioned where you will fit the main unit.
Note: The supplied loom provides a permanent live and ignition controlled
live feed to Highway but also offers other connections that may not be
required. Ensure any unused wires are safely taped up and securely tied.
4. Mount the controller
1. Run the cable for the controller from where you will fit the main unit
to the desired mounting position e.g. on the dashboard and mount
the bracket as required - either using the supplied sticky pad, swivel
bracket or third party mounting bracket.
2. Once secure - click the controller onto the controller bracket making
sure it is securely mounted.
5. Connect all cables to the main unit
1. Connect all cables to the main unit and trial fit it in place.
2. Slide the head unit back into place.
6. Check operation/setup
1. As soon as the power is connected, Highway 300Di will switch
on automatically, once it has started up it will ask you to select a
language.
2. Turn the Select knob to browse and press the knob to choose your
preferred language.
3. An autotune will be performed to scan for digital stations and Highway
will tune to a digital station when complete.
4. Switch on the head unit and select the aux-in source or FM radio
depending on fitting method.
5. Check all sources/connections work.
