Bedienungsanleitung Qibbel Front bike seat (Seite 9 von 30) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch)

610912

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

ENGLISH

Get on the bike and check whether the handlebars rotate and the brakes

operate freely and are not obstructed by the foot supports or the seat.

Ensure there is sufﬁcient distance between the armrests of the seat and

the handlebars to prevent your child getting caught. If necessary, adjust

the handlebars.

AHEAD ATTACHMENT

Figure 6M | Ahead attachment

To fasten the ahead clamp, you will need a steering column height of at

least 20 mm. Mount the ahead attachment on top of the spacers of the

steering tube. Tighten the bolts (moment 8.0 Nm) using a socket head

wrench 6. Suitable for ahead steering tube Ø 22-36 mm. If necessary, use

the supplied spacer rings to prevent damage to the handlebars and the

the ball head cap.

The ahead clamp is also suitable for standard steering columns but does

not have a movable internal ring that allows you to change the angle of

inclination. The bottom of the bracket should rest on the steering head.

Tighten the nuts tightly (moment 8.0 Nm) using a socket head wrench 6.

Suitable for steering columns of 22-28 mm.

Figure 7M | Installing the seat on the ahead attachment

Remove the retaining ring from the pin and slide the two pins of the seat

into the round holes in the attachment. Slip the retaining ring through the

attachment pin to secure the seat in place. (If required, use the (optional)

lock instead of the retaining ring, to protect from theft).

Check whether the seat is correctly mounted.

Turn the handlebars of your bike into the straight-ahead position and

check whether the seat is mounted facing straight ahead.

Get on the bike and check whether the handlebars rotate and the brakes

operate freely and are not obstructed by the foot supports or the seat.

Ensure there is sufﬁcient distance between the armrests of the seat and

the handlebars to prevent your child getting caught. If necessary, adjust

the handlebars.

If you want to use the seat on more than one bike, purchase an

additional steering tube attachment.

INSTALLING THE STYLING SET

Figure 8M | Attaching the foot straps

(Styling set Basic or De-luxe front)

Push the foot straps with the Qibbel logo on the inside through the

opening. Pull them through from the bottom to the top until they click into

place.

Figure 9M | Attaching armrests

(Styling set Basic or De-luxe front)

Click the armrest into the opening. Attach the armrest using the supplied

screws, tighten them gently (torque 1.0 Nm) using Allen key 2.5. Do this on

both sides of the seat.

Figure 10M | Attaching the seat upholstery

(Styling set De-luxe front)

Undo the safety belt (three-point – light grey - press simultaneously) and

disconnect the shoulder straps from each other (light grey parts) to be

able to attach the upholstery. Pull the two shoulder straps of the safety

belt through the upholstery from the back to the front then ensure that the

upholstery is correctly positioned. Push the seat drain plug through the

drain hole, which fastens the upholstery in place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Qibbel Front bike seat Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info