800564
5
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
GENERAL SAFETY RULES
(For all battery operated tools)
WARNING
Read and understand all instructions. Fallure to follow all instructions listed below, may result in electric shock, re and /serious
personal injury.
WORK AREA
1. keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the pres-
ence of ammable liquids, gasses, or dust of fumes
3. keep bystanders, children, and visitors away while operating a power tools.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
4. A battery operated tool with intogral batteries or a separate battery pack
must be recharged only with the specied charger for the battery.
A charger that may be suitable for one type of battery may create a risk of re
when used with another battery
5. Battery operated tool can be used with specically designated battery pack.
Using any other batteries may create a risk for re.
PERSONAL SAFETY
1. Stay alert, watch what you are doing, and use common sense when operat-
ing a power tool.
Do not use tool while tired or under the inuence of drugs, alcohol, or med-
ication. A moment of inattention while operating power tools may result in
serious personal injury.
2. Dress properly. Do not wear loose, clothing or jewelry, contain long hair.
Keep your hair, clothing and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Avoid accidental starting. Be sure switch is in the locked or off position be-
fore inserting battery pack. Carrying tools with your nger on the switch or
inserting the battery pack into a tool with the switch on invites accidents
4. Remove adjusting keys or wrenches before tuming the tool on.A wrench or
a key that is left attached to a rotating part of the tool may result in personal
injury.
5. Do not overreach. Keep proper footing and balancd at all times. Proper foot-
ing and balance the tool in unexpected enable better control of situations.
6. Use safety equipment.
Dust mask, safety glasses, non-skid safety shoes, hard hat,or hearing pro-
tection must be used for appropriate conditions.
TOOL USE AND CARE
1. Use clamps or other practical way to secure and support the workplace to a
stable platform. Holding the work by hand or against your body is unstable
and may lead to loss of control.
2. Do not force tool. Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it is designed.
3 Do not use tool if switch does not turn it on or off. A tool that cannot be con-
trolled with the switch is dangerous and must be repaired.
4. Disconnect battery pack from tool or place the switch in the locked or off
position before making any adjustments, changing accessories ,or storing
the tool. Such preventive safety measures reduce the risk of starting the tool
accidentally.
SCOPE OF APPLICATION
Cutting trees in orchards, pruning branches in municipal gardens, cutting bam-
boo, chopping rewood at home, necessary for outdoor leisure and personal
protective equipment.
LITHIUM ELECTRIC CHAIN SAW
22-252 HollandAsia Kettingzaag MANUAL.indd 522-252 HollandAsia Kettingzaag MANUAL.indd 5 05-10-2022 14:1605-10-2022 14:16
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für QLT Mini wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info