Bedienungsanleitung Quadra-Fire Castile - Pellet - Insert (Seite 14 von 40) (Englisch)

815528

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

14 02/237022-802K

Table 14.1

Event Time Temperature

MORN 6:00 AM 70°F (21°C)

DAY 8:00 AM 62°F (17°C)

EVE 6:00 PM 70°F (21°C)

NITE 10:00 PM 62°F (17°C)

R. Thermostat Temperature Programs

The thermostat by default has 4 separate program events

they are: MORN, DAY, EVE, and NITE. Each event ends at

the start time of the following event.

NOTE: When the last event is nished for each day or

group of days, the thermostat will advance forward into

the next day or group of days.

NOTE: If the thermostat is set for 2 events a day instead

of 4, the thermostat will only use the DAY and NITE

events.

STATIC NOTICE

Thermostat is protected against normal static electric

discharges, however to minimize the risk of damaging

the thermostat in extremely dry weather, please touch a

grounded metal object before touching the thermostat.

ITEM #08 (TEMPERATURE DIFFERENTIAL):

• The thermostat works by turning your heating system on

and off whenever the room temperature varies from the

desired set-point temperature.

• Use the UP/DOWN buttons to change the number value

between 1 and 9. Generally your system should cycle

on about 3 to 6 times per hour. A smaller differential

number makes the system cycle more frequently, so the

room temperature is more precise and constant. A larger

differential number will make the system remain on for a

longer duration each time and decreases the number of

cycles per hour.

• Default is set to 4.

Q. Thermostat Operation Instructions

SET DAY AND TIME:

Place the Set switch into the DAY/TIME position. With the

day ashing press UP or DOWN to set the day or the week.

Press NEXT and the clock time will start ashing. Use UP or

DOWN to set the time; verify the AM/PM indicator is correct.

Return the Set switch to RUN position when nished.

HEATING:

Basic operation of the thermostat can be obtained with

the SET switch in the RUN position. The temperature

can be adjusted using the UP and DOWN buttons.

When the thermostat is rst powered on, it will follow

a default temperature routine that is preset from the

factory (Table 14.1).

TEMPERATURE HOLD:

Temperature hold is used for maintaining a xed set

temperature; once a hold is initiated, the thermostat will

maintain the set temperature indenitely. To enter a HOLD

state, press the HOLD button one time and the word HOLD

will appear on the display. To cancel, press the HOLD button

once again.

LCD DISPLAY BACK LIGHT:

The display screen is lighted to assist viewing at nighttime,

or in locations with low light levels. Press any button on the

front panel to activate the approximate 10 second back light.

TEMPERATURE OVERRIDE:

While thermostat is in RUN mode, the set temperature

can be temporarily changed by pressing UP or DOWN.

The temporarily changed set temperature will return to

the programmed value stored in memory when start time

of the next upcoming scheduled event is reached (MORN,

DAY, EVE, OR NITE). While the temporary changed set

temperature is in effect, the word OVERRIDE will be shown

on the display screen. To cancel, move TEMPERATURE

switch to OFF and back to HEAT again.

6. Use steps 3 through 5 to set up the events for the rest of

the week or group of days.

7. Return the SET switch back to RUN.

SET TEMPERATURE PROGRAMS:

1. Move Temperature switch to HEAT.

2. Move SET switch to TEMP PROG position.

3. Starting with Monday, use the UP or DOWN buttons to

adjust the start time and set temperature for the MORN

event, and then press NEXT button to advance.

4. Adjust the start time and set temperature of the DAY

event then press NEXT button.

5. Continue in this same manner to adjust the start time

and set temperatures for the EVE and NITE events

for Monday.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quadra-Fire Castile - Pellet - Insert Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Quadra-Fire Castile - Pellet - Insert

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info