Bedienungsanleitung Quadral AURUM M10 (Seite 7 von 11) (Deutsch, Englisch)

698707

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

ENGLISH

• Never use the equipment in the vicinity of water, in humid areas or outdoors. Moisture can

bypass the electrical insulation and this will create a life-threatening risk as is the case with all

equipment that has not been specially designed against the penetration of moisture.

• Protect the equipment against water being sprayed on it. You must also ensure that no vessels

containing liquid (e.g. vases) are placed on top of the equipment.

• Do not place the equipment in the vicinity of a heat source such as an electric fire, radiator,

oven or similar.

• The slits and openings in the enclosure provide the ventilation and ensure reliable operation.

They must never be misaligned or covered.

• Burning-out of specific components cannot be completely excluded, despite the use of pro-

tective devices, if the equipment is severely overloaded by continually using very loud sound

levels. A fire might also be caused inside the equipment in theory, as a result of this type of

overloading. Therefore the amplifier should always be used within its limits and it should not

be left unattended.

• Only our technical service should undertake the maintenance of your equipment. Maintenance

will be necessary if any type of damage occurs, i.e. if the power cables or plugs are damaged,

if an object falls on the equipment, if the equipment is dropped or if liquid seeps into it. Never

open the equipment as you might touch the mains voltage (230V / 115V), which is dangerous.

• Only use furniture and other units for attaching and putting the equipment on that can be

obtained from or are recommended by the manufacturer. You must ensure that moveable tab-

letop units or shelves on which the equipment will be placed are always moved very carefully

in order to prevent damage or injuries from being caused if the equipment tips over.

• Continuously loud volume can damage your hearing!

• Only use a dry, soft cloth to clean your equipment.

• Keep the packing for possible transportation use later on and keep the plastic bag well away

from children, due to the risk of asphyxiation.

Control elements on the M10 front panel

1 Speakers: Button for speaker switching (Sequence: Group A / B / A+B / OFF)

2 LED: Loudspeaker group display

3 Operating Display: This display will light up blue, when the device is turned on and in

operation

4 On/Off Button: Press this button to turn the M10 on. Press this button again to switch the

device off (standby). During standby operation, all of the settings remain saved.

5 Standby Display: This display is blue whenever the unit is in standby mode and this indicates

that the unit can be switched on again at any time using either the remote control or button

(4) .

Note:

If this display will flash the protection circuit turn off speaker in case of failure or overload.

Reset will be possible if you operate power switch (9) located at back panel again.

1 432 5

M10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quadral AURUM M10 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info