Bedienungsanleitung Quantum Kozmo (Seite 19 von 24) (Englisch)

721970

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

CARE AND MAINTENANCE

Daily Checks

 With the controller turned off, check the joystick. Make

sure it is not bent or damaged and that it returns to the

neutral position when you release it. Check the rubber

boot around the base of the controller for damage.

Visually inspect the boot. Do not handle or try to repair

it. See a Quantum Rehab Provider if there is a problem.

 Visually inspect the controller harness. Make sure that

it is not frayed, cut, or has any wires exposed. See a

Quantum Rehab Provider if there is a problem.

 Check for ﬂat spots on solid tires. Flat spots could

adversely affect stability.

 Inspect the seating system, armrests and front riggings

for loose hardware, stress points or damage. See your

Quantum Rehab Provider if there is a problem.

Weekly Checks

 Disconnect and inspect the controller from the power

base. Look for corrosion. Contact a Quantum Rehab

Provider if necessary.

 Ensure that all parts of the controller system are securely

fastened to your power chair. Do not overtighten any

screws.

 Check for proper tire inﬂation. If a tire does not hold air,

contact your Quantum Rehab Provider for replacement

of the tube.

 Check the brakes. This test should be carried out on a

level surface with at least 3 feet (1 meter) of clearance

around your power chair.

To check the brakes:

1. Turn on the controller and turn down the speed level on

your power chair.

2. After one second, check the battery condition meter.

Make sure that it remains on.

3. Slowly push the controller forward until you hear the

electric brakes click. Immediately release the controller.

You must be able to hear each electrical brake operating

within a few seconds of controller movement. Repeat

this test three times, pushing the controller rearwards,

then left, and then right.

Monthly Checks

 Check for drive tire wear. See a Quantum Rehab Provider

for repair.

 Check the caster wheels for wear. Replace them as

necessary.

 Check the caster forks for damage or ﬂuttering which

indicates that they may need to be adjusted or have the

bearings replaced. See a Quantum Rehab Provider for

repair.

 Check the entire power chair for loose hardware and

changes in the function or performance of the power

chair. See your Quantum Rehab Provider for service and

repair.

 Keep your power chair clean and free of foreign material,

such as mud, dirt, hair, food, drink, etc.

Yearly Checks

Take your power chair to a Quantum Rehab Provider for

yearly maintenance, especially if you use your chair on

a daily basis. This helps ensure that your power chair is

functioning properly and helps prevent future complications.

Storage

Your power chair should be stored in a dry place, free

from temperature extremes. When storing, disconnect the

batteries from the power chair. See “Batteries and Charging.”

If you fail to store the unit properly, the frame can rust

and the electronics can be damaged.

Batteries that are regularly and deeply discharged,

infrequently charged, stored in extreme temperatures, or

stored without a full charge may be permanently damaged,

causing unreliable performance and limited service life. It

is recommended that you charge the batteries periodically

throughout periods of prolonged storage to ensure proper

performance.

You may wish to place several boards under the frame of

your power chair to raise it off of the ground during periods

of prolonged storage. This takes the weight off the tires and

reduces the possibility of ﬂat spots developing on the areas

of the tires contacting the ground.

Disposal of Your Power Chair

Your power chair must be disposed of according to applicable

local and national statutory regulations. Contact your local

waste disposal agency or Quantum Rehab Provider for

information on proper disposal of power chair packaging,

metal frame components, plastic components, electronics,

batteries, neoprene, silicone, and polyurethane materials.

Cleaning and Disinfection

 Use a damp cloth and mild, non-abrasive cleanser to

clean the plastic and metal parts of your power chair.

Avoid using products that may scratch the surface of

your chair.

 If necessary, clean your product with an approved

disinfectant. Make sure the disinfectant is safe for use

on your product before application.

Follow all safety instructions for the proper use of the

disinfectant and/or cleaning agent before applying it

to your product. Failure to comply may result in skin

irritation or premature deterioration of upholstery and/

or power chair ﬁnishes.

WARNING!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quantum Kozmo Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info