Bedienungsanleitung Quantum Vibe (Seite 34 von 47) (Englisch)

722004

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

34 www.quantumrehab.com Quantum Vibe

VI. OPERATION

Actuator Keys and Actuator Lights (for optional equipment)

Actuator keys and actuator lights are used for optional equipment such as power elevating seats, power elevating leg rests

and lighting systems. See figure 23. For specific operation of the actuator keys and actuator lights, contact your Quantum

Rehab Specialist.

WARNING! Power chair users are required to use their lights when visibility is restricted—day or

night. Failure to use the lighting system in periods of poor visibility may result in personal injury.

Horn Key

The horn key activates the horn. See figure 23.

Off-board Charger/Programming Socket

The off-board charger connects to the VSI through the 3-pin socket located on the front of the controller. See figure 22.

The off-board charger current should not exceed 12 amps. Contact your Quantum Rehab Specialist for more information.

WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger/

programming socket. See your Quantum Rehab Specialist for more information.

NOTE: The socket may also be used for reprogramming the VSI. Contact your Quantum Rehab Specialist for

more information.

Controller Connector

This connects the VSI to the power chair’s batteries, motors and motor brakes. See figure 22.

WARNING! Failure to properly align the connectors can result in damage to the VSI, the charger

and the connectors.

Thermal Rollback

The VSI controller is equipped with a thermal rollback circuit. The circuit monitors the temperature of the controller, which

roughly translates to motor temperature. In the event that the VSI controller becomes excessively hot (above 60° C/140° F),

motor current (amperage) is reduced. For every degree above 60° C/140° F, the motor current limit is reduced by 0.55

amps until the VSI controller reaches 70° C/158° F, at which time the current output is reduced to zero. This reduces your

power chair’s “power,” which could also reduce your power chair’s speed, and allows the electrical components and

motors to cool down. When the temperature returns to a safe level, your power chair resumes its normal operation.

Trouble Codes

The VSI controller is designed with the user’s safety as the prime consideration. It incorporates many sophisticated self-

test features which search for potential problems at a rate of 100 times per second. If the VSI detects a problem either in

its own circuits or in the power chair’s electrical system, it may stop the power chair, depending on the severity of the

problem. The VSI is designed to maximize the user’s safety under all normal conditions. The following identifies the

individual error codes. Error codes are displayed as a rapid flashing of the lights. If you get one of these error codes,

contact your Quantum Rehab Specialist.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quantum Vibe Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info