Bedienungsanleitung Quechua Keymaze 100 Go Home (Seite 4 von 97) (Alle Sprachen)

743595

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

2.3 Waterproo ng:

The product is not waterproof. It will resist light rain or sweat, but we advise you to dry it if you notice contact with moisture.

3  FIRST USE

Before using your Keymaze Quechua 100 Home, please follow these instructions:

3.1 Batteries

The product uses two AAA/LR03 batteries. You can use alkaline (1.5V), lithium (1.5V) or rechargeable (NiMH, 1.2V) batteries.

Battery life depends on the quality and type of batteries used. Generally, using alkaline batteries from a reputable brand,

battery life in use is 9 hours. You can of course extend this period by using the energy-saving modes.

Fitting and changing the batteries:

The “crossed-out bin” symbol indicates that this product and the batteries it contains cannot be disposed of

with general household waste. They must be separated and recycled specially. Take the batteries and unusable

electronic products to an authorised collection area for recycling. Recycling your electronic waste in this way will

protect the environment and your health.

3.2 Getting started

Turn the product on by holding the START button down for two seconds (to turn it o , hold the same button down for two

seconds). When using for the  rst time of the day, and for more reliable guidance, the product will require you to calibrate

the electronic compass.

To do this now, hold the product horizontally and turn it over slowly until the indicator bar  lls totally and the screen

disappears. You usually need to perform two complete turns .

IMPORTANT:

During the calibration procedure, it is important to move away from any sources or

electromagnetic interference and metal parts (including watches and metal bracelets). We

advise you to calibrate the compass outdoors. If the directions indicated are strange or erroneous, start the

calibration procedure again via the settings menu.

3.3 Detecting the GPS signal

In order to function, the Keymaze Quechua 100 Home must  x the GPS signal from at least four di erent satellites. After

turning the device on (the “satellite” symbol  ashes), hold it outside, facing the sky, in the clearest space possible until the

satellite symbol is displayed constantly. This indicates that the Keymaze has  xed the Global Positioning signal.

The time which this procedure takes varies according to a number of factors. It usually takes from

10 seconds to  ve minutes. The factors which in uence acquisition time are:

•The time and distance travelled since the last acquisition (it will  rst look for the same satellites it

used last time)

•Geographic and climatic disturbances (clouds, tree leaves, mountains and buildings, for example)

•The user’s movement: as far as possible, you should avoid moving the Keymaze at an untimely

moment during this acquisition phase.

If several disturbance factors combine, acquisition may be very slow and the GPS may even not be

able to  x the signal at all, making any use impossible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quechua Keymaze 100 Go Home Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info