Bedienungsanleitung Quickie Attitude (Seite 32 von 144) (Englisch, Holländisch, Französisch)

713899

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

ENGLISH

Attitude/Attitude Hybrid Rev.2.0

Travel modes:

There are three travel modes stored in the sMMI –

BOOST, TOUR and ECO.

In Eco mode the torque and therefore the maximum

available motor power is automatically

reduced by about 40 %, thereby reducing power

consumption. At the same time the agility is also

modified so that the drive responds better. The Eco

travel mode is particularly suited to tours in which the

battery charge needs to last as long a distance as

possible.

In Tour mode, 75 % of the maximum motor torque is

available. Performance and range are

both at a high level. Similarly in this mode the heat

generation in the motor (see section 4 Thermal

management) is moderate so that long, steep inclines

can be accomplished

very well in Tour mode.

In Boost mode the full drive performance is accessed. It

is suited to quick city travel, including moving off

powerfully at traffic lights. The full “Boost performance” is

not available all the time under certain circumstances. In

difficult conditions, for example steep ascents, the drive

power may be reduced because of heat generation (see

section 4 Thermal management). The range in Boost

mode is also less than in the other modes.

To activate the required mode, in the start menu (see

section 3.2.2), press button [2] on the controller to move

to the next sub menu. There, select “menu” and in the

next selection screen that appears, select “travel mode”.

This opens another window in which you can activate the

required mode. Once you have activated the mode, go

back to the start menu by pressing button [2] several

times.

The Eco and Sport travel modes can only be selected

when idle and not when travelling.

NOTE: The parameters stored in the Boost, Tour and

Eco modes can be adapted to your travelling

requirements. Contact your specialist dealer in this

regard.

Displaying journey information:

(bike computer functions)

Before, during and after a journey, various values and

information are displayed in field [12] and regularly

saved. You can adjust this in the normal way by tapping

menu button [2] on the controller to display the

subsequent function.

The following denote:

Current time (needs a pre-setting, see section 3.2.8).

Displays the distance you have covered (needs a “tour

reset”). Navigate using the controller buttons (see

section 2) to the function “tour reset” (start menu – menu

– tour reset; see diagram in section 3). Each time after

activating “tour reset” the display returns to “zero”.

The distance covered by you since first using your add-

on bike.

Your average speed per trip. The average speed is

calculated from every “tour reset” and is displayed after a

10 minutes of travelling time.

The time in which you travel one more more trips; any

idle time of your add-on bike is not included. The journey

time is calculated from every “tour reset”.

The current power consumption in amperes.

Your driving performance in watts

The travel mode you activated (Boost, Tour or Eco).

Fig.3.11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quickie Attitude Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info