Bedienungsanleitung Quickie Easy Max (Seite 12 von 152) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Finnisch)

713884

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

ENGLISH

12 EASY MAX

Rev.B

3.0 Transportability

DANGER!

There is a risk of serious injury or death if this if this advice is

ignored!

Transportation of your wheelchair within a vehicle:

A wheelchair secured in a vehicle will not provide the equivalent

level of safety and security as a vehicle seating system. It is

always recommended that the user transfers to the vehicle

seating. It is recognised that this is not always practical for the

user to be transferred and in these circumstances, where the

user must be transported whilst in the wheelchair, the following

advice must be followed:

1. Confirm that the vehicle is suitably equipped to transport a

passenger in a wheelchair, and ensure the method of access/

egress is suitable for your wheelchair type. The vehicle should

have the floor strength to take the combined weight of the user,

the wheel chair and accessories.

2. Sufficient space should be available around the wheelchair

to enable clear access to attach, tighten and release the

wheelchair and occupant tie down restraints and safety belts.

3.The occupied wheelchair must be located in a forward facing

position and secured by the wheelchair tie down and occupant

restraint straps (WTORS tie downs meeting the requirements

of ISO 10542 or SAE J2249) in accordance with the WTORS

manufacturer’s instructions.

4. The wheelchair’s use in other positions within a vehicle has

not been tested e.g. transportation in a side facing position must

not be carried out under any circumstances (Fig. A).

5. The wheelchair should be secured by a Tie Down Restraint

system, conforming to ISO 10542 or SAE J2249 with non-

adjustable front straps and adjustable rear straps, which

typically use Karabiner clips/S hooks and tongue and buckle

fittings. These restraints generally comprise of 4 individual

straps that are attached to each corner of the wheelchair.

6. The tie-down restraints should be fitted to the main frame

of the wheelchair as indicated in the diagram on the following

page, and not to any attachments or accessories, e.g. not

around the spokes of wheels, brakes or footrests.

Fig.A

7. The tie–down restraints should be attached as close as

possible at an angle of 45 degrees and tightened securely in

accordance with the manufacturer’s instructions.

8.Alterations or substitutions must not be made to the

wheelchair securement points or to structural and frame or

components without consulting the manufacturer. Failure to do

so will invalidate the ability of a Sunrise Medical wheelchair to

be transported within a vehicle.

9. Both pelvic and upper torso restraint belts must be used

to restrain the occupant to reduce the possibility of head and

chest impacts with the vehicle components and serious risk

of injury to the user and other vehicle occupants. (Fig B) The

upper torso restraint belt should be mounted to the vehicle

“B” pillar - failure to do so will increase the risk of serious

abdominal injuries to the user.

10. A head restraint suitable for transportation (see label on

headrest) must be fitted and suitably positioned at all times

during transportation.

11. Postural supports (lap straps, lap belts) should not be used

or relied on for occupant restraint in a moving vehicle unless

they are labelled as meeting the requirements specified in ISO

7176-19:2001 or SAE J2249.

12. The safety of the user during transportation depends upon

the diligence of the person securing the tie-down restraints

and they should have received appropriate instructions and/or

training in their use.

13. Wherever possible remove and stow safely away from the

wheelchair all auxiliary equipment, for example:

Crutches, Loose cushions and Tray Tables.

14. Articulating/elevating leg rest should not be used in the

elevated position when the wheelchair and user are being

transported and the wheelchair is restrained using Wheelchair

Transport and Occupant Restraints.

15. Reclining backrests should be returned to an upright

position.

16. The manual brakes must be firmly applied.

17. Restraints should be mounted to the vehicle “B” pillar

and should not be held away from the body by wheelchair

components such as armrest or wheels.

Fig.B

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quickie Easy Max Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info