Bedienungsanleitung Quickie Helium Pro (Seite 18 von 80) (Englisch, Holländisch, Französisch)

713879

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

Helium Rev.I

Push handle

Height-adjustable push handles

These handles are secured with pins to prevent them from

sliding out unintentionally. Opening the quick-release lever (1)

makes it possible to adjust the height of the push handles (2) to

meet your individual needs. As you move the lever, you will hear

a locking mechanism; you may now easily position the push

handle as desired. The nut on the tension lever determines how

tightly the push handles are clamped into place. If the nut is

loose after adjusting the tension lever, the push handle will also

be too loose. Turn the push handle from side to side before use

to make sure that it is clamped securely enough into place. After

adjusting handle height, always clamp the tension lever (1)

securely into place. If the lever is not secure, injuries could result

when ascending stairs. (Fig. 4.33).

NOTE – If the height-adjustable push handles are not fitted

properly, there is a risk that these will develop "play" or that they

move out of position. Please make sure that the relevant screws

are tightened correctly.

Folding push-handles

If the push handles are not in use, they can be folded down by

depressing the button (2). When they are needed again, simply

flip them back up until they click into place. (Fig. 4.34).

Anti-tip tubes

2. Adjusting Anti-Tip Tubes

To achieve the correct ground clearance of approx. 1" to 2" (25

mm to 50 mm), the anti-tip tubes must be raised or lowered.

Press the anti-tip tube release button, so that both release pins

are drawn inwards. Move the inner tube up or down to slot into

the height holes provided. Release the button. Fit the second

anti-tip tube in the same way. Both wheels should be at the

same height. (Fig. 4.35).

DANGER!

Sunrise Medical Recommends Use Of Anti-Tip Tubes:

If the anti-tip tubes are not fitted, or have been fitted incorrectly,

there is a risk of tipping over and of injury.

Fig. 4.35

Fig. 4.34

Fig. 4.33

WARNING!

Sunrise Medical recommends anti-tip tubes for all chairs. When

fitting anti-tip tubes, use a torque of 7 Nm.

1. Slotting the anti-tip tubes into the clamp:

a. press the rear button on the anti-tip tube on the anti-tip tube

adaptor, so that both release pins are drawn inwards.

b. slot the anti-tip tubes (1) into the anti-tip tube adapter.

c. turn the anti-tip tubes downwards until the release pin locks

into the clamp.

d. fit the second anti-tip tubein the same way.

Active Anti-Tip tube/Flip Up

The active anti-tip tube is mounted on the left or right side of the

axle tube. By pushing it towards the axle tube, it can be flipped

downwards for operation, (Fig. 4.35.1).

WARNING!

Make sure that the anti-tip tube will lock in the final position. An

unlocked active anti-tip tube can lead to serious injury of the

user.

Fig. 4.35.1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quickie Helium Pro Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info