Bedienungsanleitung Quickie Life T (Seite 20 von 124) (Englisch, Holländisch, Dänisch, Französisch, Italienisch)

713888

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

ENGLISH

Life T Rev.E

When transporting the unoccupied wheelchair in a vehicle, it

should be tied down or strapped in.

Quick-Release Axles for Rear Wheels (Fig. 5.0)

Removing the rear wheels will keep the wheelchair as compact

as possible.

The rear wheels are equipped with quick-release axles. The

wheels can thus be installed or removed without using tools. To

remove a wheel, simply depress the quick-release button on the

axle (1) and pull it out.

CAUTION!

Hold the quick-release button on the axle depressed when

inserting the axle into the frame to mount the rear wheels.

Release the button to lock the wheel in place. The quick-release

button should snap back to its original position.

To lift or carry the wheelchair (without wheels, footrest and

sideguards), grip the upper frame tube and the backrest tube or

the middle of the seat sling.

4.0 Handling

Folding up (Fig. 4.0)

First remove the seat cushion from the wheelchair and flip up

the (platform) footplate or the individual footplates. Take hold of

the sling from underneath in the middle and pull upwards, untill

the folding bracket clicks into place, (Fig. 4.0 - 4.1). To fold your

wheelchair until it is as small as possible, e.g., to put into a car,

you can remove the footrests (depending on the model). For this

purpose, open the latch from the outside and swing the footrest

to the side, (Fig. 4.2 - 4.3). Then the footrest only has to be

drawn out of the frame tubing.

Transportability (Fig. 4.1).

To move the mobility aid, the folded wheelchair should be lifted

by holding the front part of the cross-brace and the push

handles.

Unfolding

Push the release lever of the folding bracket (Fig. 4.4)

downwards and push both frame halves apart. Then press on

the seat tube (Fig. 4.5). Your wheelchair is then unfolded. Now

snap the seat tubing into position in the seat saddle. This can be

facilitated by slightly tipping your wheelchair to the side, as this

means that the weight is taken off one of the rear wheels. Be

careful not to get your fingers caught in the cross-tube assembly.

Fit the seat cushion.

WARNING!

Risk of finger entrapment.

Getting into your wheelchair on your own

• Push the wheelchair to a wall or a solid piece of furniture

• Apply the brakes

• The user can lower themselves into the wheelchair

• Then position the feet in front of the heel straps (Fig. 4.6).

Getting out of your wheelchair on your own

• Apply the brakes

• With one hand on the wheel or sideguard, the person should

lean forwards slightly, to transfer the body weight to the front

edge of the seat and then push up to an upright position with

both feet firmly on the floor and one foot behind the other

(Fig. 4.7).

Fig. 4.0

Fig. 4.7

Fig. 4.5

Fig. 5.0

5.0 Transporting the Wheelchair

Fig. 4.1

Fig. 4.2

Fig. 4.3

Fig. 4.4

Fig. 4.6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quickie Life T Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info