Bedienungsanleitung Quickie RubiX 2 Plus (Seite 19 von 188) (Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

713892

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

19HeliX

ENGLISH

ADVICE TO CLIENT

DANGER!

• Do not rely on the lap belt only when the wheelchair and

occupant are transported in a vehicle, use the separate

occupant lap and diagonal restraints provided in the vehicle.

• Before use we recommend that the lap belt be checked to

ensure that it is adjusted correctly, free from any obstruction or

adverse wear and that the buckle engages securely.

• Failure to make sure that the lap belt is secure and adjusted

prior to use could cause serious injury to the user. e.g. too

loose a strap may allow the user to slip down in the chair and

risk suffocation.

MAINTENANCE:

Check lap belt and securing components at regular intervals for any

sign of fraying or damage. Replace if necessary. Clean the lap belt

with warm soapy water and allow it to dry.

DANGER!

The lap belt should be adjusted to suit the end user as detailed

above Sunrise Medical also recommend that the length and fit of

the belt is checked on a regular basis to reduce the risk of the end

user inadvertently re-adjusting the belt to an excessive length.

If in doubt about the use and operation of the seat belt then ask

your healthcare professional, wheelchair dealer, carer or attendant

for assistance.

Options - Seat

COMFORT SEAT

The Comfort seat allows you to be seated for a long period of time,

because of the layer of wood and anatomically shaped cushions,

(Fig.49).

WARNING!

Brackets must lock in the cross brace tubes when fitting the seat.

Options – Seat depth growth

SEAT DEPTH

By removing the clips (1), the cross-brace unit (2) can be pushed

along the frame, which then alters the seat depth (depending on the

position of the back tubes).

Make sure that the clips (1) snap into the frame holes provided.

To keep the frame as compact as possible, the seat depth can also

be adjusted by using the back tubes (41 – 46 cm in steps of 2.5

cm). To do this remove the screws (1 and 2) on the back tube

bracket. Remove the wheels and the armrests and check that the

cross-brace is in the desired position (push the cross-brace as

described above). Move the back tubes to the desired position and

re-tighten all screws. Move the receiver tube for the armrests to the

desired position, (Fig. 50).

Fig. 50

Options – Push Handles

HEIGHT-ADJUSTABLE

PUSH HANDLES

These handles are secured

with pins to prevent them from

sliding out unintentionally. By

releasing the release lever you

can adjust the push handles to

a height which suits you. After

any adjustment to the height of

the push handles, pull the

release lever until it is tight,

(Fig.51).

WARNING!

If the lever is not secure, injuries could result when lifting over

obstacles.

Fig. 51

Fig. 49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quickie RubiX 2 Plus Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info