Bedienungsanleitung Quickie Shark RS (Seite 13 von 76) (Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

713903

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

SHARK RS / RT 13

ENGLISH

6.0 Tyre maintenance

Tyres

The Shark RS / RT is equipped with special 26’’

tyres on the rear wheels and a 26’’ drive wheel.

Make sure that they are always at the recom-

mended tyre pressure, as this will significantly

affect the drive characteristics of your Shark RS /

RT. If the tyre pressure is too low, movement and

manoeuvrability is made more difficult due to the

increased rolling resistance and this also increas-

es the amount of effort required.

The optimum tyre pressure is printed on each

tyre.

Fitting and repairing tyres

Before fitting a new inner tube:

Inspect the base of the rim and the tyre inner •

wall for foreign bodies and if necessary clean

thoroughly.

Check the condition of the rim tape, particu-•

larly at the valve hole. Only well fitting, strong

rim tape offers long-term protection against

inner tube damage through burrs and sharp

spoke heads.

Inflation:

Check all round on both sides, to make sure that

the inner tube is not trapped between the tyre

bead and the rim. Push the valve back gently and

pull it back out, so that the inner tube achieves an

optimum position around the valve.

Tube tyres

As an option you can have tube tyres with full

carbon rims.

With these, please note:

Tube tyres must be glued to the rim by a special-

ist.

Should you have a puncture, you must not con-

tinue to ride (the immediate consequences are

an increased risk of accident and the rim will be

destroyed).

CAUTION!

After fitting, check the tyre pressure.

It is essential that you maintain regulation tyre

pressure and keep the tyres in perfect condi-

tion, in order to ensure your personal safety

and keep your Shark RS / RT running properly.

7.0.0 Disposal / Recycling of Materials

NOTE: If the hand bike has been made avail-

able to you as part of a charity or medical loans

scheme, then it may not belong to you. If it is no

longer required, then follow the instructions to

return it as given by the organisation that made

the hand bike available to you.

In the following section, there is a description of

the materials used on the hand bike, in view of

the disposal or recycling of the hand bike and its

packaging.

There may also be special local regulations in

force with regard to disposal or recycling, these

must be taken into account when disposing of

your hand bike. (This can include the cleaning

or decontamination of the hand bike prior to dis-

posal).

Aluminium: Castor Forks, wheels, footrest,

Steel: Fixing points,

Carbon: Rear axle

Plastic: Handles, tube stoppers, armpads and

tyres

Packaging: Made of soft polyethylene, card-

board

Upholstery: Woven polyester with PVC coat-

ings and expanded combustion modified foam.

Disposal or recycling should be done through a

licensed agent or authorised place of disposal.

Alternatively your hand bike may be returned to

your dealer for disposal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quickie Shark RS Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info