Bedienungsanleitung Radson Likoma H E (Seite 2 von 4) (Englisch, Holländisch, Französisch)

500565

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

INSTALLATION INSTRUCTIONS

Electrical appliance

STANDARDS

The electrical appliance is conform to the standards

EN 60.335-1 and 60.335-2-30.

The heating appliances are double insulated - Class II and

splash resistant. The appliances also comply with European

directive 2004/108/EC (CE Marking on all appliances).

POSITIONING

•

The appliances must be positioned

according to the

standards in force in that regard.

• The appliance may be positioned in volume 2 of the bath-

room, insofar as no operating controls (button, switch,

etc.) are in reach of persons in the bath or under the

shower.

• The bottom of the control must be a minimum of 150

mm above oor level.

• The appliance must be positioned a minimum of 50 mm

from the wall and not be located underneath an electric

socket.

WARNING: For the safety of young children it is advisable to

position the appliance in such a way that the lowest heated

part is a minimum of 600 mm above oor level.

CONNECTION

• The appliance is designed for single-phase 230 V ~ 50 Hz.

• The appliance must be connected to the electrical

network, by means of the original power cable, via a wall

socket (not with a plug and socket!) located behind the

appliance and a minimum of 250 mm above oor level.

• Neutral: grey wire - Phase: brown wire - Control wire (pilot

wire): black wire (if this control/clock-function is present).

Use of the control wire makes it possible to decrease the

temperature if connected to an adapted clock. Open end

means comfort temperature, connected to phase means

reduced temperature. The wire may never be connected

to the earth and must be isolated if this function is not

used.

• If the power cable is damaged it must be replaced with

an appropriate cable. This replacement may only be

carried out by the manufacturer, its after sales service or

equivalent qualied persons, this is to prevent any danger.

• This appliance is lled with a specic amount of heat

conducting uid (not applicable for the models Likoma

E, Amirante E and Cosmoledo E). If it has to be opened to

carry out repairs then this must only be carried out by the

manufacturer, the manufacturer’ s after sales service

provider, who must be contacted in the event of a leak of

the heat conducting uid.

• According to the standards in force a separating

omnipolar switch must be provided.

The distance between the contacts will be a minimum of

3 mm.

• If the appliance is installed in a bathroom or shower room

it must be safeguarded with a differential switch with a

maximum of 30 mA.

• When disposing of this appliance, the heat conducting

uid must be removed by certied subcontractors (not

applicable for the models Likoma E, Amirante E and

Cosmoledo E).

FIXING

“For the correct installation of the appliances it is essential

that the xing of the appliance is carried out in such a way

that it is suitable for intended use AND predictable misuse.

A number of elements need to be taken into consideration

including the xing method used to secure the appliance to

the wall, the type and condition of the wall itself, and any

additional potential forces or weights, prior to nalising

installation.”

MISCELLANEOUS

The appliances are not designed for use by persons (and

children) with physical, sensory or mental disabilities or

persons with a lack of experience or knowledge, unless

under the supervision of, or have received the necessary

instructions regarding the use of the appliance, from

a person responsible for their safety. Children should

be supervised to ensure that they do not play with the

appliance.

WARNING: In order to avoid

overheating, do not cover the

appliance. “Do not cover” means that

the appliance must not be used for

drying clothes, for example, by placing

them directly on the appliance.

ENG

WASTE DISPOSAL ACCORDING TO THE WEEE DIRECTIVE (2002/96/EC)

The symbol on the product label indicates that the product may not be handled as domestic waste, but must be sorted separately.

When it reaches the end of its useful life, it shall be returned to a collection facility for electrical and electronic products.

By returning the product, you will help to prevent possible negative effects on the environment and health to which the product

can contribute if it is disposed of as ordinary domestic waste. For information about recycling and collection facilities, you should

contact your local authority/municipality or refuse collection service or the business from which you purchased the product.

Applicable to countries where this Directive has been adopted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Radson Likoma H E Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info