685842
2
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
1 2 3 4 5 6 7
Prog A
Prog A
1 2 3 4 5 6 7
I. SET CLOCK
Icon : clock
A- Set the current time of day
Press the
key repeatedly until this display appears :
Now use the ON and OFF keys.
The time of day will appear in hours and minutes. The +/ON key increases
the setting. Holding down the key will cause the numbers to increase more
rapidly.The -/OFF key decreases the setting.
Note : 2 blinking dots separate the hours from the minutes.
B- Set current day
Press the key to move the square through the days of the week numbered 1 to 7 :
Monday = 1, Tuesday = 2,.....
Place the
square on the current day of the week . Example : if "today" is
Wednesday, place the square on "3".
II. SET DAYS OF THE WEEK TO WATER
Icon : calendar
Press the
key until this display appears :
First select the A or B program by pressing the A/B key. “Prog A” or
Prog B” will appear in the upper left corner of the display.
Use the key to move the square through the days of the week (1 =
Monday). Note that the numbers blink.
The controller is factory pre-set to water every day. The +/ON and -/OFF
keys are used to set the water days. Press the OFF key if you do not wish to
water that day.
The square will disappear. If you change your mind, press the ON key and
the square returns.
Example : you want to water every Monday, Tuesday and Thursday. You
must therefore cancel the days you do not wish to water.
Use the key to move the square to day 3. Now press the OFF key. The
square around the number 3 = Wednesday will disappear. Repeat the procedure for Friday, Saturday and Sunday
(numbers 5, 6 and 7). In this example, only numbers 1, 2 and 4 should appear within a square.
III. SET START TIMES
Icon : alarm clock
You may operate the same cycle up to 8 times a day. At each “start time”, all stations on a program will operate in
sequence for the duration you have selected. See chapter IV.
Now you set the start times for each of the programs.
Repeatedly press the
key until this display appears :
Use the A/B key to select program A or B. The program selected is
indicated on the display by “prog” followed by A or B.
Now set the first start time.
Use the +/ON and -/OFF keys to increase or decrease the setting.
After setting the first start time, press to set the next start time. Use the
+/ON and -/OFF keys.
To set the start times for the other program, press the A/B key.
To store the starts and move to the next function use the
key.
Note : it is not necessary to use all the start times !
The SUPER IMAGE controller will automatically file your start times in
chronological order (from 00.00 to 23.59).
To cancel a start time : repeatedly press the key to display the start times. When you see the start time you want to
cancel, hold down the key for at least 2 seconds.
Note : There is only 1 dot between hours and minutes for start times.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

rainbird-super-image-series

Suche zurücksetzen

  • Gartensprengler funktioniert nicht, auf der Anzeige sieht man ein Dreieck und das rote Licht leuchtet Eingereicht am 29-6-2021 10:17

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für RAINBIRD SUPER IMAGE SERIES wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info