Bedienungsanleitung Rais Visio 1 (Seite 191 von 534) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch, Norwegisch, Finnisch)

744624

191

Zoom out

Zoom in

Vorherige Seite

1/534

Nächste Seite

6161

English RAIS/

attika

- U

ser manual for VISIO

Cleaning and care

Glass

Most woodstoves use a ceramic glass product which is resistant to heat but requires

cleaning to keep its appearance.

Soot or opaque marks can easily cleaned if the marks are fresh, however If you leave

the glass dirty for any length of time the acid from the wood can etch the surface of

the glass permantley (wet unseasoned wood, soft wood such as used in the building

industry, pallet wood should be avoided).

Only clean when cold.

Use only stove glass cleaners to remove heavy tar/ soot deposits.

All other marks can normally be removed with a damp cloth, then dry with a clean

cloth or newspaper, do not let the glass dry before applying a dry clean cloth.

With more stubborn marks i.e. opaque areas/frosting, you need put a small amount of

wood ash on a clean damp cloth. If the opaque mark/frosting doesn’t come out, con-

tact your dealer for a special remover.

Paint ﬁnish

The appliance has been coated with a high temperature paint which can last for years.

Do not clean with a damp cloth or any cleaning products as they can cause rust or

discolouration. Only clean when cold use a brush with soft bristles or dust with a lint

free cloth.

Only re-spray when necessary.

The wood burning stove and the chimney must be serviced by a chimney sweep twice a

year. During cleaning and care, the stove must be cold.

Prolonged period of non-use:

If the stove is to be left unused for a prolonged period of time then it should be given a

thorough clean to remove ash and unburned fuel residues. To enable a good ﬂow of air

through the appliance to reduce condensation and subsequent damage, leave the air

controls fully open.

Prior to a new heating season, it should be checked that the chimney and smoke gas

connector are not blocked.

Maintenance/spare parts

Especially movable parts wear down during frequent use. Door seals are also wear

parts. Only use original spare parts. We recommend service performed by your dealer

after completion of a heating period.

Combustion chamber lining

The combustion chamber lining protects the body of the wood-burning stove against

the heat from the ﬁre. The large temperature ﬂuctuations may result in cracks in the

plates of the combustion chamber lining, which however have no effect on the func-

tional capacity of the wood-burning stove. They do not have to be replaced unless they

are crumbling away due to many years of use. The plates of the combustion chamber

lining are only inserted and are easy to replace by your dealer or yourself.

Movable parts

Door hinges and door locks must be lubricated as required. We recommend that only

our own lubricating spray is used, as the use of other products may lead to the forma-

tion of odours and residues. Contact your dealer to obtain the lubricating spray.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rais Visio 1 Seite 191

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info