Bedienungsanleitung Rangemaster RDW1045FI (Seite 22 von 28) (Englisch)

623533

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Electrical Connection

The dishwasher must be installed by a qualied electrician,

in accordance with all relevant British Standards/Codes of

Practice (in particular BS 7671), or with the relevant national

and local regulations.



WARNING: THIS DISHWASHER MUST BE EARTHED

All external wiring must comply with the IEE Regulations

for the Electrical Equipment of Buildings. Connection to the

electrical supply can be made with either a plug and socket

or be permanently wired via a double pole switch. The

dishwasher is supplied with a 3-core cable.

Should the plug not t the socket in your home, it should be

removed and replaced with a suitable plug.

Note: If the plug that is tted is not suitable, it must be cut o

and disposed of properly. To avoid the risk of electrocution,

the plug must not be left where children might nd it and

plug it into a supply socket.

Three pin plugs to BS 1363 with a capacity of not less than

13A must be used and tted with a 13 amp fuse ‘ASTA’

approved to BS 1362.

After replacing the fuse the cover must be retted. If the

cover is lost, the plug must not be used until a replacement

cover has been obtained from your supplier. The colour of the

correct fuse carrier is that of the coloured insert in the base of

the fuse recess, or stated elsewhere on the plug. Always state

this colour when ordering a replacement fuse carrier.

IMPORTANT: The wires in the mains lead are coloured in

accordance with the following code:

Green and yellow: EARTH

Blue: NEUTRAL

Brown: LIVE



CAUTION

The dishwasher plug must be accessible even when

the dishwasher is installed as a built-in unit so that

maintenance can be carried out safely.

Care for the external cable

• Hold the plug, not the electrical cable, when

unplugging the dishwasher.

• Make sure that the dishwasher does not trap the electric

cable.

• Do not step on the cable.

• Avoid damage to the electric cable when moving the

dishwasher.

Damaged electrical cable

If the electrical cable is damaged or worn, switch o the

dishwasher and consult an authorized agent for replacement.

Installing the Dishwasher

The dishwasher is supplied with a template for marking and

drilling decorative door fronts. This template also contains

details for installing the dishwasher.

General

Measures must be taken to ensure that the units that are

subsequently re-sited as freestanding dishwashers cannot

topple over. This can be achieved by bolting the dishwasher

to the wall or tting it under a continuous work surface, that

is screwed to the adjacent cupboards.

For detailed information on performance tests, please contact

the following:

Dishwasher@standardtest.com

In your e-mail, please provide the model name and serial

number (20 digits) which can be found on the side of the

dishwasher door.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rangemaster RDW1045FI Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info