Bedienungsanleitung Ransomes Highway 3 (Seite 38 von 198) (Englisch, Holländisch)

661002

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

en-36

6CONTROLS

6.2H.4 MAIN RUN SCREEN ______________________________________________

The main run screen will give the operator all the information he

needs to operate the machine, it should not require any operator in-

put to view standard data whilst using the mower.

If any error presents itself whilst the operator has

navigated away from this screen, it should instantly

return to this screen.

When a button is pressed a bar will appear at the

bottom of the screen to give further options.

Buttons numbered left to right.

Button 1: Screen Brightness and Contrast

Button 2: Up Arrow (Changes time, from hour meter to

time of day)

Button 3: Down Arrow (Changes time, from time of day

to hour meter)

Button 4: Will enter the menu structure.

If no further button is pressed the button bar will disappear after a few seconds.

Symbol Description

The fuel sensor controls the left hand bar graph on the main screen,

Once the fuel level has dropped below the 25% level the icon below will start to flash.

When only the last two units are left a larger icon will replace the central icons and flash and the red

LED’s will flash five times every five seconds.

The water temperature sensor controls the right hand bar graph on the main screen. The bar graph has

four segments, at normal operating temperature that is 85° C the bar graph will be two units above

centre.

If the temperature rises to 110°C then both RED LED's will start flashing and a larger temperature symbol

will replace the central icons and flash. The buzzer will be sounded twice every four seconds. If the

Blades are running they will stop and the lift lower function will be inhibited. At 115°C the engine will shut

down.

The Parking brake icon is for indication purposes only. When the icon is shown the parking brake is

engaged. If the operator leaves the seat without applying the parking brake it will engage after three

seconds.

Indicates condition of the PTO

This will not trigger a fault until the hydraulic oil has reached operating temperature. If the charge filter

becomes blocked the icon will be shown, and the RED LED’s will flash at a rate of a one second flash

every five seconds. The buzzer will be sounded at the same rate for 1second every 5 seconds

If the engine oil pressure drops, this will activate the oil pressure icon on the display, if the engine is

running, i.e. Alternator voltage is seen, then after five seconds BOTH RED LED's will start flashing and a

larger icon will replace the central icons and flash. This will also trigger the buzzer once every four

seconds. If the engine is running then the fault will be logged, information stored is:

1.Low Engine Oil Pressure, 2.Date, 3.Time, 4.Engine Hours, 5.Length of time engine continued to run

after fault arose.

The Hour meter will be shown, and the hours will be number of running engine hours.

1234.5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ransomes Highway 3 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info