Pag.16
IINTRODUCTION
Impor
Please read this manual carefully
for perfect functioning of the stove.
Warning:
The regulations on installation and operation in this manual may differ
from the regulations in force locally
competent local authorities must always be followed. The drawings shown
in this manual are indicative and not to scale.
Information:
The packaging that we have used offers good protection against any
damage due to transport.
delivery: in the event of any damage, please inform your Ravelli dealer
immediately
Description of
With this use and maintenance manual, Ravelli wishes to provide the
user with all the information on safety in using the stove, in order to
avoid damage to persons or things or parts of the stove. Please read this
manual carefully before use and any work on the product.
WARNINGS
Ravelli stoves are manufactured taking care even on the individual
components in order to protect both the user and the installer from any
accidents.
The authorized personnel, after any work on the product, should therefore
always pay special attention to the electrical connections.
Installation must be performed by authorized personnel, who must give
the purchaser a declaration of conformity of the appliance, and who
will assume all responsibility for the final installation and consequent
good functioning of the product installed. It is also necessary to take
into consideration all the laws and national, regional, provincial and
local regulations present in the country in which the appliance has been
installed. In the event of failure to respect these precautions, Ravelli
S.R.L. declines all responsibility
This instruction manual is an integral part of the product:
please make
sure that it is always with the stove, including in the case of transfer
to another owner or user
its damage or loss, please request another copy from the T
Department.
This stove must be used for the purpose for which it has been specifically
manufactured. Do not use the appliance as an incinerator or in any
way other than that for which it was designed.
responsibility of the manufacturer is excluded for damage caused to
persons, animals or things, due to errors of installation, maintenance
regulation or improper use. No other fuel except the pellets must be used.
Do not use liquid fuels.
After having removed the packaging, please make sure that the contents
are complete and intact.
All the electrical components that make up the stove must be replaced with
original spare parts exclusively from an authorized technical assistance
centre.
Maintenance of the stove must be performed at least once a year
planning it in time with the technical assistance centre
. Do not make any
unauthorized modification to the appliance.
For safety reasons, please remember that:
- the stove must not be used by children or disabled people without
assistance;
- do not touch the stove when barefoot or when any parts of the body are
wet;
- the safety devices or adjustment devices must not be modified without
the authorization or instructions of Ravelli.
The stove, especially the external surfaces, reaches very high
temperatures when it is in operation; take care when moving it to avoid
burns.
The stove has been designed to function in any climatic condition; in the
event of particularly adverse conditions (wind, freezing), safety systems
could intervene which switch off the stove.
If this occurs, contact the technical assistance and, in any case, do not
disenable the safety systems.
1.THANK Y
Dear Customer
We would like to thank you and congratulate you on the excellent choice
you have made.
With the Ravelli stove, you will see that quality and economy can go hand
in hand, offering excellent performances with limited consumption and be-
ing totally practical. Please find below some suggestions, which we would
like to give you, to obtain the most from your stove and to fully enjoy all
the advantages that it can give you.
Through this, we want to be close to our customers to offer the maximum
technical support to all those who use our technology
Ravelli srl thanks you for your confidence
and wishes you happy times in the company
of your pellet stove.
2. SAFETY INFORMA
The stove must be installed and tested by specialized personnel instructed
by the parent company
before installing and putting the stove into operation!
If you require further information, please contact your Ravelli dealer
IMPORT
•
The place of installation of the stove must comply with local, national
and European regulations.
•
The stove must be fuelled only with quality pellets with a diameter of 6
mm as described in the specific chapter
•
The stove cannot operate with traditional wood
•
The stove must not be used as an incinerator
•
Installation, the electrical connections, checking the functioning and
maintenance must be performed by qualified and authorized person-
nel.
•
Improper installation or poor maintenance (not compliant with what
is shown in the following manual) may cause damage to persons and
things. In this condition, Ravelli is relieved of all civil or criminal re-
sponsibility
•
Before connecting the stove electrically
tubes must be completed (specifically for pellet stoves, not made from
aluminium) with the flue.
•
The protection grille inside the pellet tank must never be removed.
•
There must be sufficient circulation of air in the room where the stove
is installed.
•
Never open the door of the stove whilst it is functioning.
FIRE HAZARD!!!
•
The oven must not be used with the door open or with the glass bro-
ken. FIRE HAZARD!!!
•
When the stove is operating, the surfaces, the glass, the handle and the
pipes become overheated: during functioning, these parts must only be
touched with the adequate protection.
•
Do not light the stove without having first performed the daily inspec-
tion as described in the MAINTENANCE chapter of this manual.
•
Do not place any washing on the stove to dry
similar at a suitable distance from the stove. FIRE HAZARD!!!
•
Scrupulously follow the maintenance programme.
•
Do not switch off the stove by disconnecting the electricity mains supply
•
Do not clean the stove until the structure and the ashes have cooled
down completely
•
Carry out all operations in maximum safety and tranquillity
•
This stove in not to be used by persons (children included) with phisi-
cally of mentally reduce attitidude, or with lack of experience, unless
there are person supervising these persons under their own respon-
sibility
•
That can teach them how to use the stove.
•
Children need surveillance to avoid they play with the stove.
•
For the electrical power connection, it is necessary to provide safety
system for the disconnection of the power with a distance of opening
the contacts which allow the complete disconnection according to IIIrd
category of overtension.
•
The stove must be connected to electrical power system by a plug that
has to be easily accessible.
•
Do nou use stove for burning other materials then the material de-
puted for the porpose.
•
No other fuel to be used except pellet wood chips.
•
The outside of the stove, when in operation, can reach higth tempera-
ture: avoid to touch it.
•
Do not modify the stove.
•
Use only original and genuine parts.
3. GENERAL
The Stove must only operate in rooms.
board, combustion is completely automatic and controlled and the control
unit regulates the ignition phase, 5 levels of power and the switching off
phase, guaranteeing safe functioning.
The basket used for combustion allows most of the ashes produced by the
combustion of the pellets to fall into the collection drawer
However
standards of quality and could leave residue that is difficult to remove.
The glass has a special air circulation for self-cleaning. However
greyish film cannot be avoided after a few hours of functioning.
As already mentioned earlier
be used with the stove. However
having a different diameter
dealer
3.1 Responsibility
Ravelli declines all responsibility
of this manual, for any accidents deriving from partial or total failure to
observe the instructions it contains,
Ravelli declines all responsibility deriving from the improper use of the
stove, from its incorrect use by the user
and/or repairs or from the use of spare parts which are not original.
