789176
24
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
24
Use
Put the vehicle in gear (1st gear or park)
and put the hand brake on. If necessary,
place wheel chocks by the wheels on the
side of the vehicle to be lifted.
If required, fi t the extender (10) for
vehicles with a high ground clearance.
Attach the jack pad (11) to the jack
saddle (9)/extender (10). Place the jack
under the vehicle so that the jack pad is
under the lifting point. Check that the
jack and vehicle are stable.
Turn the venting valve clockwise until the
valve is fully closed (do not overtighten).
Anticlockwise: open
Clockwise: closed
jack saddle
load
Insert the handle into the socket and
pump up and down using the handle.
The saddle will rise, raising the vehicle
from the ground.
Position a suitable axle stand beneath
the vehicle before any form of work is
undertaken beneath it!
Lower the hydraulic jack by slowly
turning the venting valve anticlockwise.
Pull the jack away while working on the
vehicle.
When the vehicle is to be lowered again,
place the hydraulic jack under the lifting
point as before.
Start by raising the vehicle enough to
remove the axle stands.
Turn the venting valve anticlockwise and
allow the vehicle to lower. The more the
valve is opened, the faster the vehicle will
descend. Avoid lowering the vehicle too
quickly.
Checking the hydraulic oil
Turn the venting valve anticlockwise.
Lower the jack saddle fully and remove
the cover plate.
Unscrew the oil plug and look down into
the fi lling hole.
The oil level must be 12 mm or less from
the bottom edge of the hole for the oil
plug. If it is not, top up with clean, fresh
hydraulic oil.
Put the oil plug and cover plate back in
place.
Replace the hydraulic oil once a year
by draining it through the hole for the
oil plug. Make sure no dirt gets into the
hydraulic system.
Dispose of the oil in accordance with
local regulations.
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rawlink 56697 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info