----
Æ
“d ” is flashing at Channel Display(Small) which means the unit is ready to
receive Distress Call.
After the unit received “Distress Call”, when “DSC” key is pressed and released,
Alarm 1 is heard and the unit will switch to the 16CH of Working CH and then
“DSC” mode will be exited.
---
Æ
When “DSC” mode is exited, “DSC” is eliminated from the LCD.
---
Æ
Channel Display(Small) is eliminated3. DSC Watch mode can be activate by doing following
operat.
8) DSC WATCH Mode/ON OFF operation
1. DSC WATCH operation is defined that the radio is searching for CH70(DSC Channel) in
Receiving Working Channel , Scan Operation mode, and Monitor Operation mode.
2. DSC Watch operation can be selected with ON/OFF by panel operation. DSC WATCH
should be OFF when the unit is ex-factoried.
1) Press and hold SCAN/MEM key and WX/INT key simultaneously for 2 seconds.
2) “DSC” , “70” (Large CH display) and ‘In”(Small CH display) are displayed on the LCD. The
unit is in the selection mode for Individual Ship’s Call.
3) Rotate Channel Selection Knob to the right.
4) “DSC” , “70”(Large CH display) and “As”(Small CH display) are displayed on the
LCD. The unit is in the selection mode for All Ship’s Call.
5) Rotate Channel Selection Knob to the right.
6) “DSC”, “70”(Large CH display) , and “0F”(Small CH display) are displayed on the
LCD. At this stage, DSC Watch mode can be selected. “0F” on the Small CH
display means that DSC Watch is OFF.
Further to rotate CH selection Knob to the right,the unit repeat to be displayed from
the above 2) . The display will be done as 6)
Æ
2)
Æ
4)
Æ
6).
