469995
21
Zoom out
Zoom in
Vorherige Seite
1/29
Nächste Seite
Maintenance and troubleshooting 17
Maintenance and troubleshooting
CAUTION: System power
Always turn the radar system OFF before carrying out any
routine maintenance on the scanner or nearby equipment.
Introduction
DO NOT remove the rear cover of the multi-function display or the
external cover of the Digital Radome scanner. There are no user serviceable
parts or adjustments. DO NOT attempt to service the equipment.
Maintenance
Maintenance is limited to the following periodical checks:
Examine the cables for signs of damage, such as chafing, nicks and
cuts. If the connector is showing signs of corrosion, lightly grease the
threads of the connector with “Renolit Aqua 2 Calcium” grease.
Check that the cable connectors are firmly attached.
Make sure the scanner is still securely attached to the mounting
surface.
Once a year, remove, grease and re-attach the mounting bolts securing
the scanner.
Troubleshooting
The following table will help you identify the most likely cause of a
problem, and the corrective action required to restore normal operation.
Problem Possible causes and solution
“No Data” or “No Scanner”
message
1. Check that the cable connecting the
Digital Radome scanner to the multi-
function display unit is firmly attached
and undamaged.
2. Check relevant scanner fuses and
breakers.
3. Check that the power source is of the
correct voltage and sufficient current.
4. Software mismatch between equip-
ment may prevent communication.
Contact Raymarine technical support.
If using a SeaTalk
hs
Switch:
5. Check that all radar scanners are
correctly connected to the SeaTalk
hs
switch.
6. Check the status of the SeaTalk
hs
switch.
7. Check that SeaTalk
hs
cables are free
from damage.
The bearing displayed on the
multi-function display is not
the same as the actual
bearing.
Perform the bearing alignment proce-
dure described in the installation guide
for the relevant multi-function display
unit.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Raymarine RD418D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info