Bedienungsanleitung Rebox RE-2250MG (Seite 32 von 47) (Holländisch)

7894

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

www.rebox.tv

• Optional: Connect the audio left and right RCA-plugs (Red and White) on the back of your

receiver to the left and right input of an Audio amplifier, so you can enjoy the excellent quality of

the sound that is produced by your Rebox receiver.

Note: If you have an digital audio amplifier with an coaxial input, use the S/PDIF output. at the back of your receiver.

3.1.4 Connection with Audio Cable RCA Connectors (Please see inside cover Figure 7)

• On the back of your receiver you will find 3 RCA connectors (Audio Left & Right Red & White,

Video - Yellow)

• Install an audio/video cable between the RCA connectors of the receiver and those of your TV set

or amplifier.

3.1.5 Connection to a digital audio amplifier using the S/PDIF output (Please see inside cover Figure 8)

• Connect the S/PDIF out connector on the back of your receiver to the S/PDIF input connector of

your digital amplifier.

• Do not forget to turn the S/PDIF function “Enabled” in the menu.

3.1.6 Connecting a remote eye (Please see inside cover Figure 9)

• Connect the IR sensor to your remote eye if you wish to store your receiver in a place where the

IR on your receiver cannot communicate with the remote.

For example, if you wish to put your receiver in a closed environment such as a well ventilated closet, then this

accessory will be useful because it can allow the remote control to control the receiver through the remote eye.

3.1.7 Connecting a serial cable

This serial port is for service purpose only, it can only be used by our service department.

3.2 Connecting to a satellite dish

3.2.1 Connecting a fixed satellite dish to your receiver (Please see inside cover Figure 11)

• Select the satellite from which you want to receive your TV/Radio channels.

• Align your dish at the requested satellite.

• Connect a coaxial cable to your LNB.

• Connect the other end directly to the SAT IN connector of your receiver.

3.2.2 Connecting multiple fixed dishes to your receiver using a DiSEqC1.0 switch (Please see inside cover

Figure 12)

If you want to watch programs from more than one satellite (For instance from Astra and from Hot Bird) it is

advisable to use fixed dishes and a DiSEqC 1.0 switch.

• Have your Rebox Dealer aim the dishes at the requested satellites.

• Connect the LNB's with coaxial cables to the IN connectors of the DiSEqC 1.0 switch.

• Connect the OUT connector of the DiSEqc 1.0 switch to the SAT IN connector at the back of your

receiver.

3.3.3 Connecting a dish on a motorized positioner to your receiver (Please see inside cover Figure 13)

Another possibility of watching programs from multiple satellites is by mounting a dish to a motorized DiSEqc 1.2

positioner.

• Have your Rebox dealer mount the dish to the positioner with the correct azimuth angle of

elevation and let him set the centre point for your positioner.

• Connect the LNB with a coaxial cable to the LNB IN connector of the positioner.

• Connect the OUT connector of the positioner to the SAT IN connector at the back of your receiver.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rebox RE-2250MG Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info