Bedienungsanleitung Rebox RE-2250MG (Seite 40 von 47) (Holländisch)

7894

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

www.rebox.tv

• LNB Dish: Using the Left/Right buttons, select “Fixed” or “Motorised” (Move) Dish. If you use

a motorised dish, read the “Positioner Set-up” DiSEqC switch: The default is Off. To use 　

the DiSEqC switch, set up the DiSEqC version you have (V1.0 or V1.1).

• DiSEqC Input: Select position 1~4 if DiSEqC switch is DiSEqC V1.0. Select position 1~16 if

DiSEqC switch is DiSEqC V1.1.

• DiSEqC Repeat: Designate the repeat of switching (0 ~ 3).

• Switch 22 kHz: You can set the 0/22 kHz switch to ON or OFF.

Tip:

If you set “LNB type” to “Universal” (UNI1 ~ UNI3), you will not be able to change settings in both the

“LNB Power” menu item and the “Switch 22 kHz” menu item. If you want to change any of these two settings you

must set “LNB type” to zero. If DiSEqC switch is Off, you will not be able to change settings in both the “DiSEqC

Input” and “DiSEqC Repeat” menu items. Alternatively if you set LNB Dish to “Moved”, the DiSEqC switch menu

item is automatically switched to off if your “LNB dish” is set to “Fixed” you will be able to select the required DiSEqC

level in the DiSEqC switch menu item.

6. Press the Red (Save) button, the Green (Save & Exit) button to save the setting.

7. Press the Yellow (Back) button or BACK button if you don't want to save the setting.

5.1.4.3 Channel Set-up

The channel set-up is for downloading the channels available on the satellites. You can select the satellite

according to your dish alignment, change the frequency, scan mode, you can edit the satellites name, and edit the

transponder of the satellite. You can also display the LNB menu and the Positioner Set-up menu by selecting LNB

and Dish Position respectively.

1. Press the Menu button.

2. Using UP/DOWN keys on your remote, select "Installation" and press OK.

3. Using UP/DOWN keys, select "Channel Set-up" and press OK.

4. Use the UP/DOWN keys on your remote to select an item and use the Left/Right button to set up

any values.

• Satellite: Select “Satellite” and press OK or the Right button. The satellite list is displayed and then you

can choose a satellite from which you want to download your channels from by pressing OK.

• LNB: Select “LNB” and press OK or the Right button. In the “LNB field”, select one of the available LNB's.

If you want to set LNB related values, press OK and the LNB Set-up menu (Described in LNB Set-up)

will be displayed.

• Dish Position: Select “Dish position” and press OK or the Right button. It displays the dish position of the

current satellite. When you use a DiSEqC 1.2 positioner, you can select dish position in this field. To set

a dish position, the status must be “On” (in case the position has already been set) or “Off” (in case the

position has not been set).

Note:

If in the “LNB Set-up” menu described in section 5.1.4.2, the “LNB Dish” item is set to “fixed”

you will not be able to change the dish position settings in the channel set up menu. Only when you have

selected the “LNB Dish” to “moved”, you will be able to change the settings in the channel set up menu.

• Press OK button to set dish position. The “Positioner Set-up” menu will be displayed. (Detailed

description is in Positioner Set-up section 5.1.4.3.1)

• Frequency, Polarization, Symbol Rate: Shows the transponder (TP) values of the current satellite. To

change the value apply the following steps:

1. Select ”Frequency” and press OK. The list of TP values of the current satellite is displayed.

2. The functions of the colored buttons now represent other functions. <Screen 6>.

3. To edit a TP value, press the Red (Edit) button

4. To Add a TP manually, press the Green (Add) button

5. Press the Blue (Delete) button to delete the current TP value. (Save is only available in the

Edit mode or the Add mode.)

6. Press the Yellow (Save) button to save the settings.

• Scan Mode: “Canal Digitaal” (Only appears if in the field “Satellite” the “ASTRA” satellite

is chosen). Once you search channels in “Canal Digitaal” scan mode the receiver will do

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rebox RE-2250MG Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info