Bedienungsanleitung Red Epic - 1.4 2011 (Seite 13 von 168) (Englisch)

597814

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Version 1.4.0 SVN 29352 BETA

12 12

NOTE: If you ignore the X-track completely, you will have a standard exposure with 13.5 stops of

native dynamic range just as if you had not enabled HDRx. For this reason, we encourage the A-

track exposure to be "normal" as it provides the most options. If you are tempted to shoot "over-

under", you are then fully committed to using HDRx and your post production options are reduced.

NOTE: When recording in HDRx mode the camera records twice as many frames, so the maximum frame

rate, minimum REDCODE ratio, and maximum record time on your media will be cut in half.

MAGIC MOTION

Shooting at 24fps and with an 180 degree (1/48

) shutter on a film or digital camera may create an optical

illusion we are familiar with, however it is not really the way the eye sees motion. To understand this, ask

someone to stand in front of you and swing their arm over their head from one side to the other. What you

would observe in the recording is a constant motion blur until the arm stopped. What your eye sees

though is both motion blur AND a sharper reference to the arm and hand all along the motion path.

"Magic Motion" provides such a combination of motion blur (A-track) and a sharper reference (X-track),

with the bonus of extreme dynamic range not available with any other motion capture camera system.

AUDIO RECORDING

The RED EPIC can record up to two discreet channels of microphone level uncompressed 24-bit, 48 KHz

audio (four channels of microphone level or line level audio inputs when equipped with a PRO I/O

Module), that are synchronized with video and timecode, to REDMAG 1.8” SSD media.

Input signals are routed via a high quality pre-amplifier and soft clip limiter in order to achieve the desired

audio reference / recording level and to maximize dynamic range.

To assist with audio reference level setup, the camera provides a color-coded 4dB per division Peak Level

meter in the Graphical User Interface with 0dBu (-20dBFS) and +4dBu (-16dBFS) Witness Marks. Meter

range is –36dBu to +20dBu (-56dBFS to 0dBFS) with audio input type and audio input clipping indication.

Audio monitor output options include a 2-channel headphone output on the camera Brain and 2-channel

line level analog outputs from the optional PRO I/O Module, plus 2-channel and 4-channel 24-bit 48KHz

uncompressed digital audio embedded in the HD-SDI and HDMI outputs.

MICROPHONE LEVEL ANALOG INPUTS

The recording level of Microphone inputs are affected by the sensitivity of the microphone and the Gain

setting of the camera’s pre-amplifier. Available pre-amplifier range is +8dB to +62dB, with a default value

of +32dB. The camera operator should choose a Gain value that aligns the input signal to the 0dBu

reference line drawn through the camera’s peak meter (or +4dBu line if referencing to that level).

This setting provides up to 30dB of input signal headroom above reference 0dBu level before clipping

(26dB for +4dBu reference level) and maximizes the signal to noise ratio of the 24-bit digital recording.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Red Epic - 1.4 2011 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info