A Headphone B Dual Link HD-SDI (A) C Dual Link HD-SDI (B)
D HDMI Out E Preview HD-SDI F Video Genlock
G USB-2 (peripheral) H USB-2 (computer) I Audio Monitor
J Timecode K Audio Ch 1 – 4 (1-2 Upper Left - Right, 3-4 Lower Left - Right)
L RED-EVF M RED-LCD N Aux / RS232
The right side of the camera contains all the video, audio and time code inputs and outputs.
From top left to bottom right, these comprise a 3.5mm stereo headphone jack, and four DIN
1.0/2.3 video connectors that support dual link HD-SDI, Preview HD-SDI and Video Genlock.
Next an HDMI output, a USB-2 type A port for USB peripherals, and a USB-2 type B port to
connect the camera to a computer, a 5-pin mini-XLR stereo audio output and 5-pin LEMO
timecode input/output. Four three-pin mini-XLR audio inputs make up the next group. Finally
there are three LEMO connectors that provide video and power for the RED-EVF and RED-
LCD, and an Aux/RS232 port that can interface to a variety of lens motors or controllers.
A 6-inch length DIN 1.0 / 2.3 to BNC video adaptor cable and an 9 inch length mini-XLR to
mini-XLR cable and XLR to mini-XLR adaptor are provided with the camera. Additional cables
and adaptors may be ordered from the on-line store at this address www.red.com/store
