Tint
Color Temperature calculations assume a pure light source that may not be true in the specific
scene the camera is imaging. To compensate for any residual colorcast, the TINT parameter
can adjust the RGB color balance with a compensating Magenta - Green color component.
Note: Pressing Auto WB calculates a new Tint value. This is maintained if the Color Temp
is adjusted via the Manual WB parameter. If you select the Tungsten or Daylight presets,
Tint will be reset to zero, which is the default value.
Shutter Menu
Adjusts exposure time of each frame captured by the MYSTERIUM™ sensor. Shutter speed
presets are available for all common speeds (and corresponding angles) at 24 / 25 fps and 50 /
60 fps.
Preset shutter speeds may be adjusted using the RELATIVE and SYNCRO shutter parameters.
Genlock: references Shutter scan start time (phase) to an external Tri-Level Sync genlock sig-
nal. For 3D and multi-camera, permits scan time and scan phase of all cameras to be matched.
Mode: enables one of three following shutter modes. Default selection is Normal.
Normal: Shutter Speed is defined exclusively by the Shutter Speed setting.
Syncro: Shutter Speed is defined by Shutter Speed, but modified by Syncro setting.
Relative: Shutter Speed is defined by Shutter Speed, but modified by the capture fps.
