Program HD-SDI Output (each connector)
In record, the Program output provides two independent outputs of 1280 x 720p 10-bit 4:2:2
progressive scan video, at 59.94 or 50.00 Hz.
In playback, if PLAYBACK is set to 720p, the Program output provides two independent outputs
of 1280 x 720p 10-bit 4:2:2 progressive scan video, at 59.94 or 50.00 Hz.
If PLAYBACK is set to 1080p, the Program output provides a 1920 x 1080p 10-bit 4:4:4 RGB
progressive scan video signal at 23.98, 24.00, 25.00, or 29.97 Hz.
Note: the Program HD-SDI output provides 4 channels of embedded audio plus timecode.
Note: When in Varispeed, the Program output will be blanked.
Note: RED ONE™ outputs progressive scan video, it does not support 1080PsF format.
Note: If an ANMORPHIC record mode has been selected (2K ANA, 3K ANA, 4K ANA) the
video visible on the Program HD-SDI output has been stretched 2:1 to illustrate the final
2.40:1 aspect ratio of the final image projection. The actual recorded image is 1.2:1 aspect.
Preview HD-SDI
A single DIN 1.0/2.3 connector labeled PVW provides a high definition video preview output.
Preview HD-SDI Output
Note: If PREVIEW type is set to MENUS (DVI) the PVW output is disabled.
In record, the Preview output provides a 1280 x 720p 10-bit 4:2:2 progressive scan video, at
59.94 or 50.00 Hz.
In playback, if PLAYBACK is set to 720p, the Preview output provides a 1280 x 720p 10-bit 4:2:2
progressive scan video, at 59.94 or 50.00 Hz.
