Bedienungsanleitung Red Scarlet X 4.0 - 2013 (Seite 166 von 250) (Englisch)

597827

166

Zoom out

Zoom in

Vorherige Seite

1/250

Nächste Seite

RED SCARLET-X OPERATION GUIDE

955-0003_v4.0, Rev-A | 166

MEDIA

REDMAG 1.8” SSD

is available with capacities of 64GB, 128GB, 256GB or 512GB. Record duration is

dependent on resolution, quality and frame rate, but a 64GB SSD will typically provide 24 minutes of 24fps

5K RAW recording.

On MAC computers with REDCINE-X PRO installed, RED Watchdog will mount the SSD as “READ-ONLY” by

default and you cannot write the firmware to the SSD. RED Watchdog is identified by the RED Coin icon

located on the Right side of the Menu Bar. Right-click on the icon to enter RED Watchdog settings and

change to mount the drive as “READ-WRITE” to allow you to save the firmware to the SSD. Refer to

REDCINE-X PRO OPERATION GUIDE for complete RED Watchdog instructions and details.

IMPORTANT: After connecting REDMAG 1.8” SSD to the camera and BEFORE recording, you should format

the media using the camera (even if formatting was previously performed on a computer). Go to ADANCED

MENU > MEDIA > FORMAT to properly format media before recording.

NOTE: When using a RED STATION in conjunction with a 512GG REDMAG, power must be supplied to the

RED SATAION. It will not function properly using a USB cable as the sole power source.

FORMATTING MEDIA

Media must be formatted prior to using it for recording. Formatting is performed on camera, although media

may be erased on a Macintosh OS X personal computer, allowing the camera to just add the necessary

project profile and clip log data.

NOTE: Media formatted on-camera will use a name and root volume in the format:

Camera Letter + Reel Number + Month + Day + ** where ** is a two digit alphanumeric random number

generated by the camera for each file e.g. A001_0512A6.RDM

Clips recorded to the media follow similar naming conventions

A001_C001_0512A6_001.RDC

and

A001_C001_0512A6_H.mov etc.

IMPORTANT: Media must always be un-mounted prior to removal or disconnection from the camera. This

ensures power is removed from the digital media and any open data files are closed. Failure to do so may

result in lost data or corrupted files. Refer to

REMOVE MEDIA FROM CAMERA (UNMOUNT).

This procedure outlines the formatting of REDMAG 1.8” SSD media using the RED DSMC camera.

Formatting the SSD media will take about 10 seconds.

Insert SSD into camera.

Insert the REDMAG 1.8” SSD with the RED logo facing outward (away from camera body). SSD firmly

into its slot, but without using excessive force to prevent damage.

When SSD media is inserted into the camera, the camera will recognize if the media is unformatted:

On LCD, EVF and external monitors, in the media section of the GUI, NONE will be displayed twice

(as opposed to when no media is inserted, the GUI displays NONE with three dashes below “---“).

On REDMOTE, NONE will be displayed twice (as opposed to when no media is inserted, the GUI

displays NONE with three dashes below “---“).

On the Side Handle, NA will be displayed (same as if no media is present).

To format the media select SECONDARY MENUS > MEDIA > FORMAT MEDIA.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Red Scarlet X 4.0 - 2013 Seite 166

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info