Bedienungsanleitung Redmond RHB-2908-E (Seite 8 von 172) (Alle Sprachen)

659469

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

To Operate the Blender

1. Fill the beaker or a similar vessel with food.

2. Connect the blending attachment to the motor unit and turn counter-

clockwise until it clicks into place.

3. Plug in the appliance. Select the required speed setting.

4. Hold the vessel steady and place blending attachment in the food. Press

and hold down the Power button. When processing raw vegetables, fruits,

and other hard foods turn the speed control knob to increase the speed

or press and hold down the Turbo mode button.

5. Blend foods using circular up-and-down motion.

6. After use unplug the appliance. Turn the blending attachment clockwise

to disconnect from the motor unit. Clean the appliance following the

procedure outlined in “Cleaning and Maintenance” section.

To Operate the Whisk

1. Fill the beaker or a similar vessel with food.

2. Insert the whisk attachment to the gear box until it clicks into place.

3. Connect the gear box to the motor unit and turn counterclockwise until

it clicks into place.

Plug in the appliance. Turn speed control knob clockwise to setting 1

(minimum speed).

5. Hold the vessel steady and place whisk attachment in food. Press and

hold down the Power button. Turn the speed control knob counterclock-

wise to increase the speed if necessary (from 1 to 5). To whisk at a

maximum speed press and hold down the Turbo mode button.

6. Whisk foods using clockwise circular motion.

7. After use unplug the appliance. Disconnect the attachment and the gear

box from the motor unit by turning clockwise. Clean the appliance fol-

lowing the procedure outlined in “Cleaning and Maintenance” section.

To Operate the Chopper

1. Place the chopper bowl on a at and stable surface.

2. Remove the protective plastic cover from the chopper blade. Fit the blade

on the central pin at the bottom of the chopper bowl. Note: the blade is

very sharp, handle with caution! Always hold the blade by the plastic collar.

3. Fill the bowl with food. Do not ll above the maximum ll mark (500 ml).

Fit the lid onto the bowl, aligning the crosspiece of the plastic collar with

the corresponding notches in the center of the lid. Gently press the lid

down and rotate clockwise.

5. Connect the motor unit with the chopper gear box until it clicks into place.

Plug in the appliance. Select the speed setting: harder foods require

higher chopping speed.

7. Holding the bowl with one hand press and hold down the Power button

or TURBO mode button. Use TURBO mode to chop meat and other hard

foods. Maximum continuous operation time must not exceed 1 minute.

8. After use unplug the appliance. Press release buttons on the motor unit

and disconnect the motor part. Twist the lid counterclockwise to remove.

Remove the blade, holding it by the plastic collar.

9. Clean the blade and put protective plastic cover back on.

III. CLEANING AND MAINTENANCE

Wipe the motor unit with soft damp cloth.

DO NOT immerse in water or wash the motor unit under running water.

Wash the removable parts in warm soapy water. Mix water with lemon juice to

add extra shine to metal parts of the appliance. Exercise caution when cleaning

the blades, they are extremely sharp. Rinse the blades under hot running water.

Do not use sponge with hard or abrasive surface or abrasive and solvent-based

cleaners (gasoline, acetone, etc.).

Let all parts of the appliance dry thoroughly before use.

Thoroughly clean and dry all parts of the appliance before storing. The appliance

must be stored in a dry well-ventilated location away from direct sunlight or

heating appliances.

Some foods (such as carrot and beet) may stain the plastic. Apply bleach-based

solution immediately after use to remove the stains.

IV. BEFORE CONTACTING SERVICE CENTER

Problem Possible cause Solution

Appliance does

not work

Power cord is not connected

to an electrical outlet

Connect the power cord to an electrical

outlet

Electrical outlet is not

working properly

Connect to properly working electrical

outlet

Strong vibration

during operation

Food pieces are too large Cut food into smaller pieces

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Redmond RHB-2908-E Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info