Bedienungsanleitung Redmond RK-M142-E (Seite 7 von 176) (Alle Sprachen)

659398

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

RK-M142-E

GBR



the user’s right to aftersale service .

Wipe the base of the appliance with a damp cloth, then let dry. You may notice



After the appliance transportation or storage at low temperature keep it at

room temperature for at least two hours before plugging in.

You are advised to boil water in the kettle a few times before use to get foreign

smell out and disinfect the appliance.

II. OPERATION



Fix the kettle with the base to the solid even dry horizontal surface. Make

sure the outgoing vapour during boiling does not fall on wallpaper,

decorative coats, electric units and other items, which can be damaged

by humidity and high temperature.

2. Unwind the power cord to the desired length. Put the excessive part into

the recess at the bottom of the stand. Use the extender of appropriate

capacity if necessary (no less than 2.5 kW).

3. Lift the kettle off the base. Press the opening button on the appliance

lever.

4. Pour water into the kettle. Water level should be between minimum and

maximum levels on the inner surface of the appliance frame. If the kettle



in case of water shortage.

ATTENTION! The unit is meant only for water heating and boiling.

5. 



6. Plug in the kettle.



1. Press the «0/I» button. A short audible signal will be heard, and the process

of water heating will start. Button illumination will light up solid during

the operation.

2. The appliance will be automatically turned off after boiling.

3. To interrupt the heating process lift the «0/I» button.

The settings are saved if the kettle is lifted off the base during operation. The appli-

ance operation will be restarted automatically after returning the kettle to the base.



• The kettle is supplied with an automatic shut-off system upon boiling.

• In case of water shortage the automatic overheat protection will turn off

the kettle. Wait till the appliance is cooled, thereafter it will be ready for

operation.

III. CLEANING AND MAINTENANCE

Unplug the kettle and allow it to cool before cleaning.

DO NOT USE solvents (petrol, acetone, etc.), abrasive cleansers, and abrasive

coated sponges while cleaning.

ATTENTION! Before repeated usage make sure that the electrical contacts are kept dry!



Clean the kettle body and base with a soft cloth. Dry the kettle before operation.

ATTENTION! Never immerse the kettle, the base, the power cord or the socket

in water: the electrical contacts should not contact with water.

Descaling

During operation, depending on the composition of usable water, oxide spots

and scale can appear on the heating element and inner walls of the appliance.

To remove it use special nonabrasive cleansers for scale cleaning and removal

from kitchen appliances.

1. Pour water into the kettle ¾ from maximum capacity and bring to a boil.

2. After the kettle turns off, add eight percent acetic acid solution to the

maximum level on the inner surface of the body.

3. Leave this solution inside the kettle for several hours.

4. Empty the kettle and rinse properly.

5. Fill the kettle with clean water up to the maximum level on the inner

surface of the body and bring it to boil.

Empty the kettle and rinse it again. If scale still remains, repeat the

procedure mentioned above.

You can also use special means for descaling. Follow manufacturer’s instructions

in this case.



1. 

2. 

3. 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Redmond RK-M142-E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info