9
lights up,
blinking).
2
Use the
blinking).
Press and hold the c
digits.
3
When the
next step.
adjusting from the beginning.
Note! When adjusting the cooking time remember that each c
has its own adjustment range and interval.-
grammes starts to count down after the appliance reaches its required operat-
ing temperature.
Time Delay Function
The allows the start
time.
in 5 minute intervals.
1 Select and adjust the programme.
shows blinking minute value).
2
Use the
-
ment modes (selected value is blinking).
“
through the digits.
3
Press button.
function starts operating (the timer stops blinking,
before the beginning of select
4
T
the beginning.
Caution!
foods (eggs,
K
The function activates automatically
the dish warm at 70-80°С for up to 24 hours.-
cator is lit,
“C
Preliminary
T
hold
indicator
Warm”
R
The REDMOND RMC
1 Fill the bowl with cooked f
2 Close the lid and plug in the unit.
3 Press and hold down the
heard.
up.
the f
T
until the corresponding indicators go off
Non-volatile Memory
The REDMOND RMC
of a power cut
and V
supply resumes during this time period,
without any memory
“MASTERCHIEF”
The REDMOND RMC
“MASTERCHIEF”
allows
cooking cycle (
minutes after the c
and temperature adjustments
“MASTERCHIEF”
temperature modes.
The c
hours in 1 minute intervals.
the appliance enters either standby
settings.
5°C intervals.
T
1
Press the
(ex
Warm” button. the “Cancel/R
indicators light up.
2 T
Warm”
“Start/Keep W
3 T
press and hold down the
4
The display shows blinking
Use
switch between minutes and hours press the
“T
5 T
The display shows the t
default cooking temperature of
temperature value; the default temperature of other c
is 100°C.-
ture value.
6
T save adjustments
cooking cycle
stop blinking.
7.
T make and
programme can be adjusted up to 10 times
T
The
the new one.
during the c
count down from 3 minutes (in 1-se
“+”
do not want the device to save your adjustments,
After the programme is saved,
enters either the K
the timer counts up the K
The Ke
depending on whether it was enabled/disabled in the end of the cooking c
If the temperature in the end of the c
function will be automatically disabled ne
T
1 Use the -
justed and saved.
–
2 Delay the programme if nec
3 Press and
Warm”-
ing time is displayed,
count down the c
4
Press
cooking programme; to increase the temperature in the t
adjustment mode.
6 The “Start/
programme; to disable K
accommodat
7. The “Timer/t°С”
to
“MUL
8 The
9 Display
Display
A3
1 Cooking progress indicator
2 Cooking time adjustment mode indicator
3 Selected cooking programme indicat
4 Reheat/K
5 Pow
6 Cooking in progress indicator
7. V
8 Timer value indicator (time/temperature).
9 Timer
I
Carefully
Dispose all packaging materials.
Ke labels, serial identication
-
cated on the housing.
warranty benets!
Wipe the housing of the appliance with a sof
the appliance following -
ous odours during the rst use.
After transportation or storage at low temperature allow the applianc
at room temperature for at least 2 hours before use
II
Before Operating
Place at, stable,
decorative
steam,
Before operating,
have no dents,
obstructions between the heating element and the bowl.
Fill the removable bowl with food rst and then position it inside -
cook
Never operate the unit without the remo
cause ov
Never operate the unit without food or liquid inside the remo
prevent ov
Do not operate the unit in case of any
V
The REDMOND RMC
which talks you through the entire cooking proc
information and -
cally activates af
Min”
and hold the button down to reactivate the function.
T
1 Select
the cooking time
