10
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, unplug the power cord. Caution:
You must be able to safely lift 20 kg in order to raise,
lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the
vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Raise the treadmill until the storage latch
closes over the catch. Make sure that the storage latch
is fully engaged over the catch.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 30° Celsius.
Catch
HOW TO SELECT KILOMETRES AND MILES
The console can display distance and speed in either
kilometres or miles. To change the unit of measure-
ment, first UNPLUG THE POWER CORD. Next, re-
move the six screws attaching the console to the con-
sole base (see the drawing at the right). Lift the con-
sole few inches, being careful not to pull on the wires,
and turn the console over.
Locate the small switch on the back of the console.
Move the switch up or down to select kilometres or
miles. Re-attach the console to the console base. After
changing the unit of measurement, remove one of
the batteries from the console for about five sec-
onds and then reinsert it. This will reset the console.
Screws
Screws
Switch
Engaged
Storage
Latch
