Bedienungsanleitung Reer 1928 (Seite 12 von 54) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

716135

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

- 12 -

Assembly

Assembly of changing table heater with pedestal

Wall-mounted assembly of changing table heater

Safety instructions for wall installation:

• The changing table heater must be mounted on the wall in a stationary and level position. It must not be mounted on

the ceiling!

• The changing table heater must not be mounted on wood, plastic or other flammable materials or under plug sockets.

• IMPORTANT! Minimum distances: The minimum distance between the heater and the changing table is 100 cm. A mi-

nimum distance of 35 cm between the heater and the ceiling must be observed at all times. The heater must be placed

at least 65 cm away from furniture and flammable materials. Fire hazard in case of non-compliance!

• For installation in bathrooms or shower rooms, the regulations of the local utility company must be observed. The heater must

be positioned in such a manner that the pull switch cannot be reached from the bath or shower.

• Never install the unit above a bath tub!

Please fold out the inside cover of your user manual for a graphic illustration of the assembly process.

1. Insert the 5 feet (B) into the foot connector system (A) as shown in fig. A1.

2. Place the foot cover (C) on top (fig. A2).

3. Insert the lower attachment tube (D) into the opening (fig. A3).

4. Fix the lower attachment tube in position by inserting the plastic screw (E) from below (fig. A4).

5. Slide a cable holder (G) over the lower attachment tube (fig. A5).

6. Connect the middle attachment tube (H) with the groove to the lower attachment tube as shown in fig. A6 and turn the middle

attachment tube until the holes in both tubes align.

7. Fix the middle attachment tube into place using the supplied screw (H) and a Philips screwdriver.

8. Slide the remaining cable holder (G) over the middle tube and connect the upper attachment tube (I) to the middle attachment

tube (fig. A7). Fix the upper attachment tube in position using the supplied screw and a Philips screwdriver.

9. Remove the assembly plate from the unit as shown in fig. A8.

10. Place the changing table heater (J) on the pedestal and fix it in position with the plastic screw (F) (fig. A9).

11. Open the grey locking screw of the upper attachment tube (fig. A10) and set the changing table heater to the desired height

using the telescopic rod. Ensure that a minimum distance of 100 cm to the changing table is observed. Adjust the unit to the

desired height by closing the locking screw.

12. Secure the cable by pushing it into the cable holders (fig. A11).

13. Position the changing table heater in the desired location, out of reach of children and observing the specified minimum distan-

ces. Ensure that the pedestal is positioned securely on a level surface.

Note: For an installation with fewer than 5 feet (for example due to limited space), the user must ensure stability of the changing

table heater pedestal by other means. Never place a changing table heater with fewer than 5 feet freely in a room.

1. Remove the assembly plate from the unit as shown in fig. B1.

2. Hold the wall bracket on the wall taking into account the minimum distances (fig. B2) and mark the drill holes with a pencil. Use

a spirit level to ensure the bracket is level.

3. Bolt the wall bracket to the wall (fig. B3) using the supplied screws and wall plugs (J).

4. Slide the changing table heater into the relevant grooves on the wall bracket (fig. B3).

5. Screw the changing table heater to the wall bracket (fig. B4) using the screws removed in fig. B1.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Reer 1928 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info