Bedienungsanleitung Reer 33030 Foodball (Seite 9 von 27) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

716275

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

16 17

Remove the bottle from the baby food warmer and, as the warming

operation is over, turn the rotary switch for the temperature setting

back to the OFF position. Remove the device’s plug from its power

source and pour the water out of the baby food warmer.

Caution: Hot! Please let it cool down for some time.

Caution: Before you give the bottle to the child, always check the temperature of its con-

tents ﬁrst. Shake or touch the bottle to let the heat distribute evenly. The baby food must not

be hotter than 37 °C (i.e. body temperature). Check the temperature by putting a couple of

drops on the inside of your wrist. The milk should feel warm, but not hot.

2. Warming premade food in a feeding bottle

Before warming, remove the label from the food bottle, so that it does

not detach during warming and stick to the water container of the

baby food warmer. Unscrew the lid of the food bottle before putting it

in the device.

Place the bottle in the device and ﬁll the water container with warm

water until it reaches approximately 1 cm from the edge of the con-

tainer.

Alternatively, you can use the food container for warming the baby food.

Put 90 ml of water in the baby food warmer. To do this, you can

use the food cup with an integrated measuring cup.

Then put the baby food in the food container (max. 190 g) and

place it without the storage lid in the baby food warmer.

Caution: Do not use more than 90 ml of water for warming;

otherwise, the water will spill over when using the container.

Move the rotary switch on the front side to the mark. The oper-

ating light is on.

We recommend stirring the food occasionally to let the heat distribute

evenly.

The warming time can be extended or shortened depending on the contents and the amount

thereof, on the type of food container used as well as on the initial water temperature and

the ambient temperature. The warming time

for baby food is about 6–8 minutes, depending on the factors mentioned above, as well as

on the initial temperature of the baby food.

Remove the glass or food container from the baby food warmer and, as the warming opera-

tion is over, turn the rotary switch for temperature setting back to the OFF position.

Remove the device’s plug from its power source and pour the water out of the baby food

warmer.

Caution: Hot! Please let it cool down for some time.

Caution: Before you give the baby food to your child, always check the temperature of its

contents ﬁrst. The baby food must not be hotter than 37 °C (i.e. body temperature). Thus,

always check the temperature.

3.Function for maintaining heat

You can also keep already-heated baby food warm: to do this, simply

leave the bottle in the device after warming and set the rotary switch

in the position for keeping the food warm (see Figure).

Caution: For microbiological reasons (germ formation), you should

keep baby food warm for no more than 1 hour.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Reer 33030 Foodball Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info