Bedienungsanleitung Reer 36020 Vapomat (Seite 6 von 23) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

716271

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Before rst use

Please rinse all parts to be disinfected before starting the process and remove any food residue.

The disinfection process lasts for about 10 minutes. The disinfecting unit switches o automatically once the disinfec-

tion process is completed. Please wait for 3 minutes before removing the cover so that the equipment can cool down.

1 2 3

75 ml

water

Safety instructions on use

• When placing items inside the unit, ensure that the steam can reach all surfaces and condensate can run o.

• Never start the equipment without water and do not transport it during operation. Never add any liquid other than

drinking water to the container.

• Add 75 ml tap water to the equipment. Keep this amount as accurate as possible. If you add less than 75 ml of water,

the disinfecting unit does not produce sucient amounts of steam to disinfect all items with certainty. If you use

more than 75 ml of water, the process is unnecessarily prolonged.

• Do not start the equipment without having placed the parts basket inside.

• Do not touch the equipment while in operation. The surfaces of the equipment become very hot during operation

and may cause burns.

CAUTION! Hot surface!

• Do not remove the cover during disinfection as the equipment contains boiling water. Beware steam escaping from

the vents in the cover. Please do not obstruct the opening or place a cloth over the cover.

• Never open the equipment before the process is completed, as the items are then not disinfected.

• Pay attention when opening the disinfecting unit - hot steam escaping may cause burns.

• Bottles and other items are very hot directly after a hot steam disinfection and should only be removed using the

bottle gripper that is included.

• Use the disinfected parts immediately after removing them, as otherwise they will have to be disinfected again.

• Some condensate always remains in the equipment. Pour the water out of the unit and dry all parts of the equip-

ment. Caution - this remaining liquid may also be hot.

• The disinfecting unit requires about 15 minutes to cool down before it can be started again.

Note: After the disinfection process has started, it can only be stopped by disconnecting the power supply.

Cleaning

For reasons of hygiene and in order to keep lime deposits to a minimum, we recommend cleaning the disinfecting

unit, bottle basket and cover with a cloth after every use. Always disconnect it from the mains and ensure that the

equipment is cold before cleaning it. Do not immerse the unit in water. The bottle grid and small parts basket are

dishwasher-safe. Do not use any scouring pads, scouring agents or solvents for cleaning; they might damage the

equipment and its surfaces. If the equipment is not cleaned and dried after every use, lime deposits will occur on

the heating plate at the bottom of the disinfecting unit after some time.

GB GB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Reer 36020 Vapomat Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info