Bedienungsanleitung Reflecta CyberView X5 - MF5000 (Seite 32 von 36) (Englisch)

657742

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

3. Curves and Levels

Adjust image settings by moving Curve and Levels settings.

Comparison between before and after adjustment is displayed for

reference.

Example:

When the previewed image appears to be too dark, adjustments with the Input

slider in the Curves and Levels window can be made to correct the image. Selecting the Gray

slider in the center and moving it to the left will result in changes in the “After” view resulting

in a lighter image. Once the adjusted image is acceptble select “OK” to send changes to

the scanning hardware. The same method can also be used to adjust each color channel

independently, using the channel drop down menu “RGB = All colors” R = Red, G = Green,

and B = Blue.

Menu Commands - Windows

Exposure Setting: To adjust the exposure time (R, G, B) press ”Reset” to restore

to the default setting.

Menu Commands - Help

• Update Firmware: Upgrade the  rmware version, select the path where

the  le of  rmware has been saved. (These  les may be downloaded from

our website)

• About: Display system information (including operation system, CPU),

product information (including product name, model name, hardware

version,  rmware version, software version, device information including

interface and optical resolution). This information is helpful to provide

when requesting technical support.

ENGLISH

Default “Exposure Setting” is 100% for all 3 color channels.

Increase the exposure of the scanning light source if images are too

dark. Decrease exposure if images are too bright.

Menu Commands - Window (overview)

Settings for the CyberView window and Exposure adjustment for the scanner.

Menu Commands - Scan

a. Prescan

Prescan the existing  lm.

b. Scan

1. Scan Selected to File… > Scan the selected  lm to a speci ed path.

c. Revert

Discards all modi cations and restores the image back to the original

state.

Preference - See Scan Setting (See Page 13)

Exit

Closes the CyberView X5 user interface.

There is a message pop-up “Quit the application prompts to save docu-

ments?“ click “Yes“ to save , “No“ to discard the current

settings or “Cancel“ to return to Cyber View X.

1. Un/Lock scanning area.

2. Zoom In: Magnify image.

3. Zoom Out: Reduce image.

4. Rotate 90 Left: Turn the image 90° counter clockwise.

5. Rotate 90 Right: Turn the image 90° clockwise.

6. Flip Horizontal: Flip the image horizontally.

7. Flip Vertical: Flip the image vertically.

8. Revert: Discard all modi cations and restore the image.

Toolbar Diagram

II. Function Bar Diagram

In order to optimize scanned image quality, please select your  lm type and

brand from the toolbar:

Prescan:

Pre-scan the current  lm.

Scan: Scan  lm.

Image Adjustment: Press drop down button for more options.

Auto Calibrate: Calibrates the Scanner

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Reflecta CyberView X5 - MF5000 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Reflecta CyberView X5 - MF5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info