559009
31
Zoom out
Zoom in
Vorherige Seite
1/39
Nächste Seite
Basic Operation Basic Operation
ENGLISH ENGLISH


Power on/o
1. Connect to the power supply with the adaptor.
2. To turn on the TV -> Press POWER button on the TV or remote control.
To turn off the TV -> Press POWER button on the TV or remote control.
1. Picture menu
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
Input Source select
Press INPUT button on the TV set or remote control to display the input
source menu, and use CH+/- button on the TV set or up/down button
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure the connections are
prepared.
Picture Mode: Select your desired picture mode from Dynamic, Standard,
Mild and User.
Brightness: Adjust image black level.
Contrast: Adjust image contrast.
Sharpness: Adjust the sharpness(Gray and invalid in VGA/PC mode).
Colour: Adjust image colour from black and white.
Tint: Control the tint (NTSC mode only).
Colour Temp.: Select an optimum color temperature mode to suit your eyes
for viewing from Warm, Cool, Standard.
Aspect Ratio: Change the aspect for the screen from 4:3,16:9, Zoom 1, Zoom 2
or Panorama etc...
Noise Reduction: If the broadcast signal received is weak, you can select the
Noise Reduction option to reduce the video noise level between Off,
Low, Middle and High.
Use
S/ T button to select the main menu, and press X / OK button to enter the subme-
nu. In the submenu, use
S/ T button to select the function item, press X / OK button
to enter the setup menu, then press
W/ X button to adjust, or press S/ T to select and
press OK /
W/ X button to confirm.
* Press MENU /
W button to return to the upper menu.
* Press EXIT button to exit the menu display.
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
Main menu: Picture | Sound | Channel | Feature | Setup
Submenu
(Picture menu
for example)
You should
operate the OSD
menu according
to the hint.
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Reflexion LED19FWMB14 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info