Bedienungsanleitung REL Acoustics Strata 5 (Seite 14 von 20) (Englisch)

66886

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

REL Acoustics ST 5 User Manual

REL SET-UP MADE SIMPLE

REL designs are not traditional subwoofers, but true sub-bass systems. A REL is designed to

augment the performance of “full range” speaker systems, to provide linear response down to

below 12 Hz (Studio III, -6 dB down at 9 Hz). Therefore, for the moment, set aside everything

you’ve been taught about subwoofers and how they are integrated into a stereo or theatre

system. REL’s set-up and positioning differs from other subwoofers. A REL will take

advantage of physics and room acoustics to provide deep pressurisation of the kind no

ordinary sub-woofer can deliver. It’s important that you bring to the set-up process a

willingness to do things a little differently in order to obtain these superior results. The result of

your labours will be an utterly seamless integration of genuine sub-bass to a sound system,

regardless

of the main speaker’s low bass capability.

Two Things Before You Begin

A. It is helpful to know that you will almost always connect the REL to the input on the

rear panel labelled “Hi Level

.” This connection is made using the supplied cable, the

bare leads of which connect to the speaker output terminals

of the power amplifier.

The easy connection at the REL is completed with a Neutrik Speakon connector. The

purpose of connecting to the speaker output terminals is one of the unique secrets of

REL’s success. By connecting to the REL’s High Level input from the amplifier, you

build forward the sonic signature of your main system, including the tonal balance

and timing cues. In this way, the REL shares the signal that is fed to the main

speakers.

B. When possible, the REL should be placed in one of the corners behind the speakers.

A REL sub-bass system will deliver true LOW bass pressurisation, not the mid-bass

that most competitors settle for. Low bass pressurisation below 30Hz is best derived

from corner placement, where the most linear and efficient low bass can be

generated.

Basic set-up should take no more than ten to fifteen minutes to accomplish once connected.

Connecting

High Level connection: using the enclosed cable with the Neutrik Speakon connector

is always the first choice. By connecting to the amplifier’s speaker outputs the sonic

signature of the entire amplification chain is folded into the signal for the sub, thereby

keeping timing and timbre cues consistent. This connection can be made without

affecting the performance of the amplifier because the sub-bass system’s amplifier

input impedance is 10,000 ohms. This method also avoids the detrimental effects of

additional electronics in the amplification chain.

The High Level hook up procedure is explained above.

Positioning

The optimal position for a REL is in one of the corners behind the main speakers. This

position provides 9 dB of acoustic amplification and allows for the most linear true low bass

wave generation.

The Process

To begin the set-up process, choose a piece of music that has a repetitive bass line, which is

very low in frequency. Cut 4 from the soundtrack to Sneakers (Columbia CK 53146) has a

repetitive bass drum throughout, which gives you plenty of time to move the woofer around.

The recording venue was quite large for this recording, and therefore it has a very deep and

large-scale bass signature. This type of recording is perfect for the set-up process, and

should be played at the highest reasonable level expected for system playback.

With the REL remote control, adjustment of each stage is simplicity itself to achieve.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REL Acoustics Strata 5 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info