10 REL R-Series Owner’s Manual
Connecting Up
Connecting the Sub-Bass System using the Neutrik Speakon high level input
To engage the Neutrik Speakon plug, insert fully into socket and rotate clockwise
until locked.
To remove the Neutrik Speakon plug, grip body of plug, place thumb on chrome lever,
move lever backwards rotate plug anti-clockwise (or “counter-clockwise”) a quarter
turn and withdraw.
The HIGH LEVEL input is designed to accept the stereo (two channel) signals from the
speaker terminals of your receiver, integrated amplifier, and basic amplifiers. This has
the advantage of ensuring that your Sub-Bass System receives exactly the same signal
as the main speakers, which means that the character of the bass from the main
system is carried forward into the Sub-Bass System. This is a very important point
and together with the REL’s ABC circuitry, ensures superior system integration of the
Sub-Bass System with the main system.
High Level connections should be made to the same binding posts as the
main speakers
Connect as shown above. Red to amplifier main right speaker red terminal, yellow to
amplifier main left speaker red terminal and black to amplifier main speaker black
terminal, right or left but not both.
Plug the Neutrik Speakon plug into the HI LEVEL Neutrik socket.
The output level is adjusted using the control marked HI/LO LEVEL
+L – +R–
Amplifier Main Speaker Outputs
Red
Yellow
Black
Release Lever
HIGH LEVEL INPUT
Supplied Neutrik Speakon
High Level Interconnect
