8
CARE AND POLISHING
The high quality finish is best cared for by using one of the many proprietary
furniture polishes. Alternatively, a soft bristled brush may be used to sweep off any
dust falling on the surface. If objects are to be placed upon the top, it is advisable
to use a small mat to protect the surface and to avoid risk of any rattles.
Everything about STUDIO has been designed and engineered to last a lifetime.
SOME DO’S AND DONT’S
1. Always protect the sub-woofer from getting wet.
2. Always ensure that the panel is correctly earthed via the three core mains
cable - it is not sufficient to rely on the earth being made via the signal
ground.
3. If the mains lead is lengthened (or shortened) make absolutely certain that
the wires are correctly terminated before switching on.
4. In the unlikely event of a fuse failure, always replace by an identical fuse of
the same rating and characteristics. A spare set is included with this unit.
Further replacements are available from your supplier.
5. Do not attempt to remove the panel or the drive unit from the enclosure - all
Warranties become null and void if the seals are broken.
6. Never try to force the switches or the Gain control around further than their
normal stops.
7. Do not try to modify or “improve” the design by putting things into the reflex
port.
It is not necessary to switch off between listening sessions - it will not significantly
shorten its life by leaving it switched on. On the other hand, it will not harm sound
quality if it is always switched off. The power consumption in the quiescent state
is negligible.
