Bedienungsanleitung Reloop JOCKEY III Master Edition (Seite 86 von 89) (Deutsch, Englisch, Französisch)

490491

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

FRANÇAIS

7.3 CONSEILS DE DÉPANNAGE

Si vous avez des problèmes lors de l‘utilisation de votre Reloop Jockey 3, consultez cette ressource

en premier recours pour dépanner :

Symptoms Possible Causes Corrective Measures

The device does not

receive any power when

turning it on via the ON/

OFF Button -B56-.

USB cord or mains ad-

apter are not correctly

connected.

Check whether the USB cord is cor-

rectly connected to a free USB port of

your computer and Jockey 3‘s USB port

-B69-. Please also check whether the

mains adapter is connected correctly to

the mains connection -B54-.

The Controller‘s LEDs are

only weakly lit and the

device does not react.

The power supply is not

sufcient.

Connect your computer to a secured

power line. Also it is necessary to con-

nect the included mains adapter to the

corresponding jack -B54-.

Not all outputs of the

integrated audio interface

can be selected in the DJ

software.

The ASIO driver is not

installed correctly.

Please install the ASIO driver again.

Also please read the paragraph „ASIO

Driver Installation“ in the chapter

„Computer Conguration“.

The audio interface‘s

sound is distorted.

The ASIO driver is not

used.

The performance set-

tings of your computer

do not correspond to the

computer‘s capacity.

Please make sure that the ASIO driver

is installed and is also being used. Ple-

ase refer to the paragraph „ASIO Driver

Installation“ in the chapter „Computer

Conguration“.

It is also possible that in the ASIO

driver‘s settings the available computer

capacity has to be re-congured. Open

the settings in Traktor, select the ca-

tegory „Audio Setup“ and click on the

„Setings“ button next to the sound card

selection window. Then select „Sys-

tem Performance“ 4 „Normal“. If the

problems persist you can also select

„Relaxed“ in the same menu.

The DJ software does

not show any reaction to

the usage of any of the

contoller's control ele-

ments.

Traktor LE is not congu-

red corectly.

Traktor Pro is not ins-

talled correctly.

If use the included Traktor LE version,

start the Setup Wizard again. Refer to

the paragraph „Traktor LE Setup“ in the

chapter „Computer Conguration“.

When using Traktor Pro the mapping

has to be loaded again. To do so follow

the instructions in the paragraph „Trak-

to Pro Conguration“ in the chapter

„Computer Conguration“.

The decks do not react to

the control elements of

the controller.

The Deck Select Swit-

ches are in the IN1/IN2

position.

Make sure that the Deck Select Swit-

ches are switched to the Traktor decks.

In analog mode the inputs

are not played via the

master output.

The two Input Switches

are not in the MIX posi-

tion.

Put both Input Switches to MIX positi-

on.

There is a problem that is

not listed here.

Various causes. Visit the website www.reloopdj.com/

forum in order to get support regarding

your Reloop products.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Reloop JOCKEY III Master Edition Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info