Bedienungsanleitung Reloop MIXAGE Interface Edition MK2 (Seite 21 von 56) (Deutsch, Englisch, Französisch)

490489

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite





• The inside of the device does not contain any parts which require maintenance, with the excep-

tion of wear parts that can be exchanged from the outside. Only qualied staff must carry out

maintenance, otherwise warranty does not apply!

• The fuse must exclusively be exchanged against fuses of the same class, with the same trigger

features and nominal current rating.

• Only use cables that comply with regulations. Observe that all jacks and bushes are tightened

and correctly hooked up. Refer to your dealer if you have any questions.

• Disconnect the device from the computer when not in use and before cleaning!

• Position the device on a horizontal and stable low-ame base.

• Avoid any concussions or violent impacts when installing or operating the device.

• When selecting the location of installation make sure that the device is not exposed to exces-

sive heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger your

own safety and that of others!

• Do not rest any containers lled with liquid that could easily spill onto the device or in its im-

mediate vicinity. If, however, uids should access the inside of the device, immediately discon-

nect the USB cable. Have the device checked by a qualied service technician before re-use.

Damage caused by uids inside the device is excluded from the warranty.

• Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5°

C) conditions. Keep the device away from direct exposure to the sun and heat sources such as

radiators, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or

vents. Always ensure sufcient ventilation.

• The device must not be operated after being taken from a cold environment into a warm

environment. The condensation caused hereby may destroy your device. Do not switch on or

operate the device until it has reached ambient temperature!

• Controls and switches should never be treated with spray-on cleaning agents and lubricants.

This device should only be cleaned with a damp cloth. Never use solvents or cleaning uids

with a petroleum base for cleaning.

• When relocating, the device should be transported in its original packaging.

• Devices supplied by voltage should not be left in the hands of children. Please exercise particu-

lar care when in the presence of children.

• At commercial facilities the regulations for the prevention of accidents as stipulated by the

organization of professional associations must be observed.

• At schools, training facilities, hobby and self-help workshops the operation of the device must

be monitored with responsibility by trained staff.

• Keep this operation manual in a safe place for later reference in the event of questions or problems.



• This device is a professional DJ MIDI controller with integrated 4 channel soundcard that can

control software. The device should be connected via USB cable to a computer.

• This product is designed exclusively for indoor application.

• If the device is used for any other purposes than those described in the operation manual,

damage can be caused to the product, leading to exclusion of warranty rights. Moreover, any

other application that does not comply with the specied purpose harbours risks such as

short circuit, re, electrical shock, etc.

• The serial number determined by the manufacturer must never be removed to uphold the

warranty rights.



• Check the technical safety of the device regularly for damage to the casing, as well as for

wearout of wear parts such as rotary knobs and sliding faders.

• If it is to be assumed that a safe operation is no longer feasible then the device must be dis-

connected and secured against accidental use. Always disconnect the USB cable.

• It must be assumed that a safe operation is no longer feasible if the device bears visible de-

fects, if the device no longer functions, following longer storage under unfavourable conditions

or after major transport stress.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Reloop MIXAGE Interface Edition MK2 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info