Bedienungsanleitung Reloop SPIN 2plus Digital Vinyl System (Seite 102 von 153) (Deutsch, Englisch, Französisch)

490509

102

Zoom out

Zoom in

Vorherige Seite

1/153

Nächste Seite

ENGLISH

6.9 Why is there no signal?

There are several possibilities, please check the following:

• Is your mixer/amp turned on? Are gain, line and master controls turned up?

• Did you choose the correct input on your mixer (phono instead of line)?

• Is vinyl control activated? (Button „Vinyl“ below the Label monitor has to be green)

• Is Spin! 2 correctly congured?

• Have all the cords been plugged correctly?

• Does Spin! 2 recognize the timecode?

• Is a microphone plugged in? Unplug the mic, it blocks Input 1.

• Is the correct Out Port set? Left Player: Out Port 1, right player: Out Port 2.

6.9.1 Can I use the interface as a sound card?

You can use the Spin! 2 interface as a mobile USB sound card with two stereo inputs and two stereo

outputs. Also it features a microphone input with adjustable gain. If you use the mic input it will work

instead of stereo input 1.

6.9.2 What do I have to observe if I use a Shure M44-7?

This cartridge will need a phase inversion. Go to „File -> Options -> Timecode“ and tick the box next

to „Phase Inverse“.

6.9.3 Why is the music skipping a beat now and then?

The cause may be a hard disc that is too slow. One solution is to set the setting “Load Tracks to

RAM” to “rapid” under “options>system”. Furthermore it is recommended to defragment the hard

disc where the tracks are stored in order to optimize the reading abilities.

6.9.4 Why does the speed / the pitch of my tracks uctuate?

There are several reasons for this:

• Spin! 2 is not calibrated

• the neddle is dirty/ dusty

• there is too much weight on the needle

• the needle is worn out

• the timecode vinyl is worn out (scratches, cue burn) or dirty

6.9.5 Is there an auto mix/party mix function?

Yes. Add some tracks to the Spin! 2 list (NOT the Spin! 2 library) and select „play Spin! 2 list“ by

right-clicking into the list. The tracks will be played alternately between both players.

6.9.6 How can I optimize the performance of Spin! 2?

A computer with decent performance and stability is important in order to have Spin! 2 running

reliably. Here are some tricks:

• Open the settings for your system performance in your control panel under „System>Advanced“.

Here select the setting „adjust for ideal setting“.

• Deactivate any LAN / WLAN and network devices.

• Deactivate virus scanners and power managment software.

• In Windows, go to „System Properties ->Advanced -> Performance Options“ and tick „Background

services“ in your Windows settings

• Defragment your hard disc

• Don‘t have other programs running in parallel with Spin! 2.

• In Spin! 2, go to „File -> Options“ and tick „Sound before graphic priority“

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Reloop SPIN 2plus Digital Vinyl System Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info